You're currently viewing posts by Pinsider rwh.
Click here to go back to viewing the entire thread.
Quoted from 85vett:My first thought was 91% alcohol
Alcohol generally will only work on latex based paints, enamels, epoxies etc. will not break down using it. I used to use alcohol to identify which type of paint was used on swimming pools whenever the owner did not know.
Quoted from PinRob:I would have left off the tape on the razor blade, once you put the tape on the two edges of the razor blade you no longer had a truly flat surface running over the glass.
Agree because the edges are elevated and the blade is not flat, you will to have exert more downward pressure to reach the surface with the center part of the blade and it will be forced to flex or bow.
Quoted from phil-lee:When giving advice assumptions must be made as to the skill level of the User, I do not believe this method caused the scratches even if the tape was torn. I will hesitate giving advice the next time and sorry for your issues with the glass.
I don't think the information you gave was bad, I know a lot more people who that same trick and they swear by it. More than one way to get things done and all involve practice.
You're currently viewing posts by Pinsider rwh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-i-did-something-stupid-to-my-expensive-jjp-s-potc-invisiglass-?tu=rwh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Norwood, OH