Trying to fix an issue with the sling switches on my FG. They were in bad shape and had been rewired before by someone that liked bare wire. So I put in new switches and now they all work except for the secondary one on the right side of the playfield.

Can someone tell me or show me a picture of how that side should be wired on that switch.

the side tab has the diode attached and the wire that goes to the second switch. I think that this one and the one on the other end of the diode coming from the harness are reversed

Thanks

John

I

here is the picture, gut feeling is the wires on the diode are flipped. The old wire was 18 guage lamp cord that was twisted on and not sodiered.

on a side note the right flipper has stopped working, when I hold the flipper button and push up on the flipper it holds so if my voltage is correct i assume part of my coil is dead. just from reading if i understand correctly the coil has 2 parts one to pull back and one to hold in place? depending on what part is energized.

image.jpg

image-480.jpg