(Topic ID: 239703)
Murfreesboro, TN
According to the Auxiliary lamp driver board schematic for Centaur, J1 pin 11 should be the 5 volts. J1, Pin 1 is a digital signal, AD1.
Ground is J1 pins 13, 14, & 15, which is the same as TP2 on the aux lamp driver board.
Quoted from Neo299:J1 11 pin is 5 volts. What I can’t understand is why do some lights work, some go out when I test or ground pin 1. Bad board? Can I not attach video here?
Upload video on YouTube and put link in your post. Boom, attached.
It’s kings of steel. I had to buy a magnifying glass to find all the cold solder joints. I found 5. Now all but one light works. I do have another question, I’m getting a mild shock when I touch metal on the pin. Like under where the lock down plate is,and the metal on the side. The ground plug has been cut off. I’m just waiting on a new cord from pinball life. You think a new cord will fix this? Thanks
Quoted from Neo299:You think a new cord will fix this? Thanks
Yes. As a quick test run a piece of wire from the ground braid on the machine to the ground braid on the machine next to it. Or to the plate screw on the wall outlet.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
