I got my f-14 a month ago and it did not have any of the beacon parts. Not even the snubber/relay. I just bought a replacement snubber but could not for the life of me find an image of how the wires hook up.

The schematic doesn't say. Does anyone have a good straight on image of how the wires are installed from the plug going into the snubber and then which go out to the beacon?

the image is what I could piece together so far.

schematic-beacons.pdf

There is no com or no terminals on the snubber.
From left to right it says:

COIL. NC. DRV. 28V. GND

In all the pictures ive seen ive been able to make out the brown and red. Or pins 3 and 4.
From the schematic I see pin one bypasses.

It's wierd because I feel like if I say anything else you're going to get grumpy. But I can't give up.

Yes I knew that the blue white wires go to gnd and coil. However, does it go out from coil to the beacon or out from ground to the beacon?
Does pin 2 go into gnd or coil?

I really appriciate your help

Gotcha, thanks for the help.