Quoted from hailrazer:I've got the expensive and the cheap and this is the one I always use now:
amazon.com link ยป
Not saying the crimper is bad, but according to the description, it's only for 3 and 4 pin Molex Connectors.
You're currently viewing posts by Pinsider girloveswaffles.
Click here to go back to viewing the entire thread.
Quoted from hailrazer:I've got the expensive and the cheap and this is the one I always use now:
amazon.com link ยป
Not saying the crimper is bad, but according to the description, it's only for 3 and 4 pin Molex Connectors.
Quoted from arcademojo:Ok a little off topic but, is there a tool for these connectors? The little screwdriver just doesn't seam right.
If you're going to be doing a lot of those a good ratcheting tool is a must, but if you don't use them often or only for a few connectors, these are fine:
There's one for .100 and .156 spacing connectors. Just don't use a screwdriver or something else with a blade edge. it's sloppy, can damage the connector and you can hurt yourself.
You're currently viewing posts by Pinsider girloveswaffles.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-best-crimp-tool-for-repinning-connectors?tu=girloveswaffles and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.