Replaced a dirty old vault with a shiny new one while doing a swap. The new one sits differently (as far as I can tell, everything on the part seems the same dimensionally, which further confuses me).
Old one is fine, new one is tilted and sits well below pf. The axel it sits on had 3 washers, and by moving one I got it close to flush, but it still has a slight tilt which could lead to balls hanging or extra wear. Anyone got any tips for leveling this thing?
IMG_20211126_211118413~2 (resized).jpgIMG_20211126_211207196~2 (resized).jpg