Heist just arrived with my new multimorphic machine. Can’t wait to fire it up and eventually check out some of the other modules.

A few questions for you guys. Are you using the system manager to level the game and get the right pitch? I asked because the pitch keeps oscillating between 5 and 6 on the machine, but when I use my level on the field, it is reading close to 7. I do have the back leg levelers raised some. Also I can't seem to get the crane calibration to work. I'll do the first part and on the second part get a green light . Then when it does the up and down fine tuning auto calibration afterwards I might get 1-2 of those several attempts that are green but otherwise red and won't pick up the ball in the final part.

Finally got it dialed in. Took the crane top off and made sure everything in the crane was right. Went through calibration again and was noticing after the second part when it tried to fine tune that it wasn’t going back exactly where I had the crane aligned originally on the ball. The fine tuning part seemed to be going more to the right then what I had. So the next time I just got it aligned with the ball but with x axis number a little higher (more left). Did the trick and worked since.
Loving the game but man my scores suck. Hate to say it but may move those outlane posts up till I get better. Have to train my brain to use that upper flipper button.

Hard to say. I did take off the top of the crane to inspect but did not see anything off. Often I’d note that after moving the crane to a position about a second later it would move slightly. I think that movement was skewing the calibration.