Hi everyone,
My "Haunted House" table is sick again.
This time it seems more important.
After turning it on, the GI cycles like it normally does but, after 10-seconds, when the machine normally boots up, it freezes. No display, cycling of the lights... nothing. The only thing that remains on are the GI lights.
I have a Ni-Wumpf CPU and Ni-Wumpf driver board installed along with a RottenDog PSU.
The cables/connectors look fine. All of the fuses are in tact. Everything looks beautiful but... still... nothing.
Argh!
-Bob