Hi everyone, I picked up a Gottlieb Haunted House and I am having trouble getting it to a point where I can access the Self Test. It was working that far before, but not now. I have no idea what happened. Anyway, I have gone through the process and I have everything fine with Power supply and the CPU boots and the displays come on and are strobing or kind of pulsing, but when I power down and add J5 to the CPU board I get nothing different from before J5 was connected. As I recall, I should get a 5 second delay and then the displays should come on. (J5 is coin door and slam switch). There is no battery corrosian on the cpu board and a remote battery has been installed. My original problem was the left side flippers on the main (middle) playfield were not working and possibly lower level problems, but I haven't got to that point yet, backwards in fact with the no longer able to get into attract mode problem. Oh, also, I thought that it would be a Slam Tilt switch on the Coin door, but the boards in this game (CPU, Power Supply and Driver Board) all have Flippers.com stickers with an Order number And the Slam Tilt "Defeat" mod has been done and is labelled as such. Boards look beautiful.
Thoughts?
Thanks, Dave