I am working on the woz 2.0 update. To help people in the future, the manual says the part number for the data cable to connect the RGB LED boards on the mini playfields is 19-3096-08 but that is incorrect. The correct part number is 19-3096-09.
You're currently viewing posts by Pinsider xenon75.
Click here to go back to viewing the entire thread.
I am working on the woz 2.0 update. To help people in the future, the manual says the part number for the data cable to connect the RGB LED boards on the mini playfields is 19-3096-08 but that is incorrect. The correct part number is 19-3096-09.
Quoted from PinMonk:I'd also send this information to Butch at JJP. He has updated the instructions based on feedback before, this seems like a changes that definitely needs to be made.
Ok I will send him an email.
A few other thoughts...
Don't hesitate to adjust the zip ties or cut them altogether on the new data/power cables for the 2.0 upgrade. I found that removing the zip ties and occasionally the part # tape allows you to get the leads where they need to go cleanly. Once plugged in, a few new ties on each offshoot keeps the install clean.
To echo the other posters, use the smallest screws (3/8") on the installation of the GI Boards (without spacers) and RGB insert boards. This will leave the correct number of 1/2' screws for the installation of the larger boards on the two mini playfields.
In most cases you don't need to cut the ends of the old data/power cables if you want to preserve them. They work their way out of the harness pretty easily.
To remove the lock nut near castle VUK you will need a 6" 11/32 nut driver or an extension on a socket driver.
Print out a COLOR version of the 2.0 lighting map from the manual. It is essential to see not only the routing of the cabling but the orientation of the boards when mounted to the playfield. I used this page as a guide for installation of each board and I did not have to make a single adjustment when it came time to connect them with the new power/data cables.
Everything else is fairly straight forward or documented in this thread.
You're currently viewing posts by Pinsider xenon75.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/has-anyone-installed-woz-20-yet-im-about-too-?tu=xenon75 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.