Elvira and the Party Monsters
Bally, 1989
Tales of the Arabian Nights
Williams, 1996
Twilight Zone
Bally, 1993Hi!
I have huge problems repairing my pins as the nuts, bolts, and so forth, all seem to be in US Customary size. I ordered a set of hex drivers from Marcos and that solved some problems, but I still have a few issues. Could someone please be so kind as to send me what size (in US Customary) tools are needed for general pinball repair (particularly the hex wrench for flippers).
Thanks!
5/32 allen wrench for WPC flippers
also:
1/4" nutdriver
5/16" nutdriver
11/32" nutdriver
3/8" nutdriver
#1 and #2 Phillips screwdriver
#1 and #2 (or equivalent) common screwdriver
other assorted pliers, wrenches, etc.
See the "what's in your tool kit" thread:
https://pinside.com/pinball/forum/topic/what-is-in-your-tool-kit#post-1944935
If access to US nuts and bolts is hard, it might be worth picking up this:
http://www.pinballlife.com/index.php?p=product&id=241
Gives you a bit of everything in the common sizes.
Quoted from cody_chunn:1/4" nutdriver
5/16" nutdriver
11/32" nutdriver
3/8" nutdriver
#1 and #2 Phillips screwdriver
#1 and #2 (or equivalent) common screwdriver
and if you can get them in magnetic that's a real plus....especially the Phillips screwdrivers.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hardware-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Warsaw
Mobile, AL