(Topic ID: 299652)

Hardware for the coin return cover

By Silverstreak02

2 years ago

Topic Stats


Linked Games

Topic Gallery

View topic image gallery

6C80604D-19F8-4D67-889A-2E3BF964ACFA (resized).jpeg
F80C7DE6-8619-4394-BE09-E8CE9FF6A7A2 (resized).jpeg
#1 2 years ago

I have a new coin door for my 66 Gottlieb Cross Town pin. I purchased a used coin return cover since the original was missing. It is painted and ready for installation. What hardware should I use to attach it to the door? I attached pictures to show the door and coin return cover.

6C80604D-19F8-4D67-889A-2E3BF964ACFA (resized).jpeg6C80604D-19F8-4D67-889A-2E3BF964ACFA (resized).jpegF80C7DE6-8619-4394-BE09-E8CE9FF6A7A2 (resized).jpegF80C7DE6-8619-4394-BE09-E8CE9FF6A7A2 (resized).jpeg
#2 2 years ago

Most screws are either #6 or #8.

#3 2 years ago

Make sure the tongue of the U shaped item is stinking out the front, ie the hump is at the back nears the cover plate. I can get you a pic if nesc.

#4 2 years ago

I ran a 8-32 tap through the holes and found some screws. I may go to Ace for some shiny screws instead. Thanks for the help.

#5 2 years ago

The Gottlieb factory used four 8-32 x 1/4" long SEMS screws to attach the cover to the door.

#6 2 years ago
Quoted from KenLayton:

The Gottlieb factory used four 8-32 x 1/4" long SEMS screws to attach the cover to the door.

Thanks Ken

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 5.00
Cabinet Parts
Space Coast Pinball
Hey modders!
Your shop name here


Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.