This is interesting, and gives a great example why you should NEVER put a hardtop in a pin. Ugh, so much more work than just getting a CPR playfield.
You're currently viewing posts by Pinsider mtnfrost.
Click here to go back to viewing the entire thread.
This is interesting, and gives a great example why you should NEVER put a hardtop in a pin. Ugh, so much more work than just getting a CPR playfield.
Quoted from Lovef2k:I agree. I have done 3 EBD CPR swaps. Just running the new trace wire and changing out the lamp sockets is a chore. Also getting the drop target banks aligned before pre-drilling the pilot holes for the banks is tricky and time consuming.
Either hardtop or swap, both are a crap ton of prep and work.
There is no way swapping a playfield is more work than this: https://pinside.com/pinball/forum/topic/vids-guide-hardtop-restoration-comet#post-4469974
You're currently viewing posts by Pinsider mtnfrost.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hardtop-install-and-restoration-for-eight-ball-deluxe?tu=mtnfrost and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.