Dickinson, TX
Quoted from Lostcause:This arrived earlier[quoted image]
I got mine from Amazon last week! I have not watched it yet though.
(Topic ID: 300250)
Linked Games
Halloween (Blood Sucker Edition)
Spooky Pinball, 2021-
Halloween (Collectors Edition)
Spooky Pinball, 2021
-
Halloween (Standard Edition)
Spooky Pinball, 2021
Topic Gallery
You're currently viewing posts by Pinsider Gotfrogs.
Click here to go back to viewing the entire thread.
1 week later
Quoted from Boycer:Only found 3 issues so far. 2 were easy fixes. Wires got ripped off the pumpkin during shipping. They had it protected with foam, but something else needs added to support it from twisting during shipping. Second issue was one of the orange plastic pop anchors on the topper fell out. I was lucky to find it buried in the box. Spooky should include a few of these in their goodie bags. Third is I keep getting a stuck ball in sanitarium
that is supposed to drop into the shooter lane. Rubbers are too close. I haven't figured this one out yet.Game plays great so far. Biggest surprise are the sounds. One of the better games I've played when it comes to music/effects. Game play is great so far. I suck and still need to learn rules. I'm impressed how fast it is. I don't know why I was expecting a slow game. I also find myself draining because I watch to watch the animations. Hope rest of you don't have any issues!
[quoted image]
I don’t like how they have the giant socket underneath the pumpkin. It would look much nicer if the hardware was hidden inside. When I get my machine this is something I am going to try and clean up.
4 weeks later
1 week later
1 week later
Quoted from metallik:What's the problem? It's nice to have some slack so you can pull the playfield out if needed. Cabling looks fine to me.
It is not well laid out or organized. Some cables are longer than others. It is just like R&M. I understand that this is inside the game and not seen by anyone except when working on the machine. I was really hoping that the wiring would be better in Halloween. It is kind of like this. Both work but one looks much better!
good-bad-cabling (resized).jpeg 2 weeks later
Thanks, I just ordered one! Seems really silly that it is not included. I just hope it color matches my machine well. I ordered a red one from another company for my WOZ and it did not match at all. I ended up not even installing it because the red was so far off.
Quoted from miyagiPins:Another week or two until mine gets here.
Woooot!
Anyone buy other Halloween merchandise like shirts or anything to celebrate on shipment day??
Bake a Michael Myers cake or open a nice bottle of wine or whiskey?
Let’s talk how y’all celebrate this awesome pin showing up at your house.
Not really but I am receiving my powder coated shooter rod block and Halloween rug today.
3F1A6982-15C3-49F8-83F7-F178B377782F (resized).jpeg 1 week later
Quoted from metallik:PSA: Spooky packing material can easily be recycled into kitty scratchpads with some packing tape. Wrap around the ends, and then cover the bottom to catch the crumbs.
[quoted image]
LOL! I think people that have cats and pinball machines are crazy! No way I would risk having my machines scratched up.
Quoted from John_C:How are you folks getting your build & shipping confirmations? Are you contacting Spooky and asking or are you getting an email notification?
All of my interactions and communications have been directly with Nitro (the distributor I bought from).
242 was delivered today. Got a stuck ball during my first 10 minutes of play. Could not free it even shaking the cabinet. I know I recall seeing this in the past. The factory should modify the rubbers to help prevent this.
00109A61-485D-40D4-8FF0-ADE7D2C10E66 (resized).jpeg363F99CD-ED15-4568-AF73-4B2CE940D68B (resized).jpegDDE94CDD-ADB9-42DD-8B92-FDA60573593C (resized).jpegQuoted from lpeters82:It's a simple fix. Just pinch the rubber between the two posts and give it a pull. That will take the slack out of the rubber along that bottom side.
Have you tried installing a rubber that is 1/4” smaller?
Quoted from GreenMachine19:My wife and I first played Halloween at Pintastic after I had already preordered. Her one negative comment was that knife looks fake, can’t you do something about that? I said yes so here you go. Real knife. Not sharp, I took the edge off so I wouldn’t slice myself open. Had to be done. My wife required it. One added bonus, it doesn’t flex or bounce around like the plastic one.
[quoted image][quoted image][quoted image]
Looks great! Would you you be open to making another one and selling it to me?
1 week later
Quoted from GreenMachine19:Has anyone who upgraded to the IPS monitor having issues with the sound? The screen is definitely better. The picture is way more crisp. But it seems like the sub woofer does not work at all. I’ve messed with the volume settings on the amp and monitor controls volume. I contacted IPS but they don’t respond at all. The sound on mine is superior with the stock monitor.
No problems here. I would reseat all of the connections.
1 week later
2 weeks later
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider Gotfrogs.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
