Is this what you get if you complete the final wizard mode?
https://twitter.com/Super70sSports/status/1503908659193069571
pasted_image (resized).pngIs this what you get if you complete the final wizard mode?
https://twitter.com/Super70sSports/status/1503908659193069571
pasted_image (resized).pngQuoted from mrclean:Interesting …I’m in the high "300"’s direct from Spooky & still haven’t received any payment due or options email yet.
My distributor likely just gets payment lined up earlier than Spooky direct to make sure there is no delay.
I was hoping to see someone do this!
Quoted from Boycer:3 Michaels aren't enough for me....3D printed and painting now
[quoted image]
So im plugging usb stick inside the coin door. Booting the machine up but nothing happens. Game boots up as normal with 1.05 code.
Yes the usb has the code on it just fine
Quoted from bgwilly31:So im plugging usb stick inside the coin door. Booting the machine up but nothing happens. Game boots up as normal with 1.05 code.
Yes the usb has the code on it just fine
I always use the usb socket behind Backglass. Works every time.
Quoted from JesseJames23:I always use the usb socket behind Backglass. Works every time.
I only see one back there wasnt sure if it was the right one.
Hello owners. There is a super annoying ball trap on the upper middle playfield that I had to address after it ruined an awesome game. Please see photos. I fixed it by adding a small Gottlieb style wire form. The problem has been solved forever.
20220316_190434 (resized).jpg20220316_190441 (resized).jpg20220316_191106 (resized).jpg20220316_191218 (resized).jpg20220316_192108 (resized).jpg
Quoted from Mad_Dog_Coin_Op:Hello owners. There is a super annoying ball trap on the upper middle playfield that I had to address after it ruined an awesome game. Please see photos. I fixed it by adding a small Gottlieb style wire form. The problem has been solved forever.
[quoted image][quoted image][quoted image][quoted image][quoted image]
It seems your plastic protector was set too far back upon build. Here is where mine sits.
20220317_014721 (resized).jpg20220317_014731 (resized).jpg#359 received the butter email yesterday. Chose to move back in-line while working on gameroom remodel. Spooky was very accommodating.
Quoted from PinCrush:#359 received the butter email yesterday. Chose to move back in-line while working on gameroom remodel. Spooky was very accommodating.
You should trade with an anxious later number
Quoted from PinCrush:#359 received the butter email yesterday. Chose to move back in-line while working on gameroom remodel. Spooky was very accommodating.
When you choose to move back in line do you have to coordinate a switch in game# with another person or do they make your game and just store it in the meantime?
Thanks!
Quoted from Tuxedomask23:When you choose to move back in line do you have to coordinate a switch in game# with another person or do they make your game and just store it in the meantime?
Thanks!
They asked that I let them know when I'm ready to build. It just has to be before the Bloodsucker run, which makes total sense.
Quoted from PinCrush:They asked that I let them know when I'm ready to build. It just has to be before the Bloodsucker run, which makes total sense.
Thanks. Wonderful company for sure!
Quoted from gliebig:Going to play one on location tonight. What are some basics I should know for mode starts/mb....?
Hit the 3 drops and head to the pumpkin scoop for modes.
Easiest MB is all 3 hedge shots or the middle playfield shot etc.
Hello all,
Question. Anyone have the balls to even think of trying to Dremel the Hedge Multiball insert out enough to get it to all light up completely? Bought a Playfield from Spooky but I dont have it in me to do a playfield swap. Thanks.
Does spooky use fed ex or RL to ship to pa? My acnc was shipped RL but thought I read their using fed ex now. Any recent # s wanna chime in? Thanks.
Quoted from PBMAN:Hello all,
Question. Anyone have the balls to even think of trying to Dremel the Hedge Multiball insert out enough to get it to all light up completely? Bought a Playfield from Spooky but I dont have it in me to do a playfield swap. Thanks.
That is crazy talk. It is like Michael is hiding behind the hedge (which is cool when you think about it). To be honest, I think it was intentional but Spooky caved to the vocal minority. Just enjoy your game as is.
Mad Dog. Great info. Thanks. Looks like I have a playfield for sale if anyone is looking for some wall art PM me.
Quoted from PBMAN:Hello all,
Question. Anyone have the balls to even think of trying to Dremel the Hedge Multiball insert out enough to get it to all light up completely? Bought a Playfield from Spooky but I dont have it in me to do a playfield swap. Thanks.
The plastic insert is sized for the existing hole and wouldn't cover the dremeled-out part, this won't work.
Quoted from PBMAN:Mad Dog. Great info. Thanks. Looks like I have a playfield for sale if anyone is looking for some wall art PM me.
Just post the price here and it'll be gone quick. Like, I'd PM you to ask but I'm probably just kicking the tires because I'm curious lol.
So does anyone find the two hard modes, Let Me In and Laurie Slashes Back far easier to complete than the easy ones especially Bob and Lindas demise or is that just me? I crush Laurie Slashes Back every time while Bob and Linda theres so much to do for completion thats almost always a fail. I'd get Annie more often were not for that right orbit shot, that one I just cant seem to hit for the life of me.
Is there a secret skill shot for Reaper? I plunged to the ball and immediately hit it into the scoop. Reaper started!
There might as well not even be a right orbit shot, on my game. I never hit it, and haven’t found the shot at all.
Quoted from Mad_Dog_Coin_Op:That is crazy talk. It is like Michael is hiding behind the hedge (which is cool when you think about it). To be honest, I think it was intentional but Spooky caved to the vocal minority. Just enjoy your game as is.
This.
Good lord people and the Multiba ll thing. Yes, you should totally take out your $30 Dremel tool and go to town on the pf!
Quoted from SharkDiver:So does anyone find the two hard modes, Let Me In and Laurie Slashes Back far easier to complete than the easy ones especially Bob and Lindas demise or is that just me? I crush Laurie Slashes Back every time while Bob and Linda theres so much to do for completion thats almost always a fail. I'd get Annie more often were not for that right orbit shot, that one I just cant seem to hit for the life of me.
I agree. I love the B&L mode, but it doesn't belong in the "easy" section. Just so many shots, including the balcony. I'd probably call it the hardest mode in the game. And yes...there is a joke in that statement somewhere...
Annie isn't bad. I love the right orbit. Tough shot, but not bad, and oh so satisfying when you hit it. I think I actually have more trouble with the left, but neither are THAT bad. Balcony is way harder, to me at least.
Quoted from Frax:Just post the price here and it'll be gone quick. Like, I'd PM you to ask but I'm probably just kicking the tires because I'm curious lol.
$450 Shipped
Quoted from PBMAN:$450 Shipped
Is this a replacement playfield that you won't end up using?
Quoted from PBMAN:Yes. Brand new main playfield.
[quoted image]
Edited. I assumed where I should not have.
Quoted from PBMAN:Thanks Roost for your kind words but I bought the new playfield. Also the Distro reached out to me.
Sorry, real sorry. I'm an idiot and assumed.
No Problem. Like you defending the little guy. Spooky is a great company. Customer Service is beyond great.
Quoted from PDX-Mike:Direct order from Spooky #489 checking in! Just got the butter / no butter email form Spooky!
I am 481 through nitro. How did you get an email already? Congrats btw
Quoted from hassellcastle:#298 CE, non butter (margarine edition)
Purchased from Spooky. Received 3 weeks ago[quoted image]
The "I can't believe it's not butter!" cab.
Quoted from dnaman:The "I can't believe it's not butter!" cab.
This was filmed in my bro’s old house!
Quoted from Lostcause:This was filmed in my bro’s old house!
So cool! I've never seen that commercial, thanks for sharing.
If someone comes up with an Ozzy pin, now we can have a small mod for it that many might not have a clue about.
Seems like a crapshoot as far as receiving the fix or not. Thanks
Quoted from John_C:I am #251 and the insert IS NOT fixed, though according to posts here in this thread my machine was built well after the fix was announced. A friend of mine with a lower-numbered machine has the fixed insert.
I posted this over half a year ago... It was a guesstimate as to when the first roughly 500 games would ship...
"So if that’s the case I’d say if you are under number 90-100 you’ll likely get this physically delivered prior to “Halloween”. With adding approximately a 1-2 week +/- some weeks slowing down (shortage of parts, corrections etc) some increasing etc these would be my guess for delivery for the following roughly first 500ish" I'm in the upper 300's and don't have my game yet, but it looks like sometime in April according to my own chart
#120-140 11/01-11/15 2021
#141-159 11/16-11/28 2021
#160-179 12/01-12/14 2021
#180-199 12/15-12/31 2021
#200-225 01/01-01/15 2022
#226-240 01/16-01/31 2022
#241-270 02/01-02/15 2022
#271-300 02/16-02/28 2022
#301-340 03/01-03/15 2022
#341-365 03/16-03/31 2022
#366-390 04/01-04/15 2022
#391-425 04/16-04/30 2022
#426-449 05/01-05/15 2022
#450-480 05/16-05/31 2022
#481-515 06/01-06/15 2022
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/halloween-owners-threadhes-coming-home/page/87?hl=pbman and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.