(Topic ID: 300250)

Halloween owners thread…He’s Coming Home

By dnapac

2 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

pasted_image (resized).png
IMG_6888 (resized).jpeg
IMG_6889 (resized).jpeg
Screenshot 2024-03-22 205639 (resized).png
IMG_4275 (resized).png
IMG_4028 (resized).jpeg
IMG_3837 (resized).jpeg
IMG_3838 (resized).jpeg
IMG_7388 (resized).png
IMG_4867 (resized).jpeg
IMG_4865 (resized).jpeg
IMG_0488 (resized).jpg
IMG_0487 (resized).jpg
IMG_0482 (resized).jpg
IMG_0486 (resized).jpg
IMG_0484 (resized).jpg

Topic index (key posts)

15 key posts have been marked in this topic, showing the first 10 items. (Show topic index)

There are 16,873 posts in this topic. You are on page 33 of 338.
#1601 2 years ago

Has anyone else been having an excessive amount or rejects from the center ramp, where perfect shots come right back down?

#1602 2 years ago
Quoted from KYLEDM5:

Has anyone else been having an excessive amount or rejects from the center ramp, where perfect shots come right back down?

It will be the center triple drops causing the issue! Even a tiny hair high or low can really negatively affect performance of the ramp. You want it perfectly flush. They have a couple bolts and wing nuts under the mech for height adjustment. A slap shot or on the fly shot often won't make it up but a solid full power shot should be successful. That's the intended design!

#1603 2 years ago

I don't have any info on mine other than an email a month ago and I am #133. Kind of confusing how people behind me are getting theirs and I still don't have mine and am a location. Absolutely frustrating as usual.

#1604 2 years ago

Give them a call or send an email to Morgan they will get you taken care of as soon as possible.

Quoted from DreamTR:

I don't have any info on mine other than an email a month ago and I am #133. Kind of confusing how people behind me are getting theirs and I still don't have mine and am a location. Absolutely frustrating as usual.

#1605 2 years ago
Quoted from DreamTR:

I don't have any info on mine other than an email a month ago and I am #133. Kind of confusing how people behind me are getting theirs and I still don't have mine and am a location. Absolutely frustrating as usual.

Sounds like it's been in a box and ready to go on our end! Contact your distributor!

#1606 2 years ago
Quoted from SpookyLuke:

Sounds like it's been in a box and ready to go on our end! Contact your distributor!

He said he would contact me when it ready. That was Oct 19. I messaged him today but it is TG.

#1607 2 years ago

Looking forward to the Knife Handle shooter - gonna look great

62187FE8-9D18-43F5-AE9B-8CB90F656026 (resized).jpeg62187FE8-9D18-43F5-AE9B-8CB90F656026 (resized).jpeg
#1608 2 years ago

The blood on the shooter housing looks great. Looks like it was made for Halloween.

#1609 2 years ago
Quoted from John-Floyd:

Looking forward to the Knife Handle shooter - gonna look great
[quoted image]

Where did you get blood for the shooter housing from?

#1611 2 years ago

I have this one on Elvira. It’s cast resin and hand painted vs a flat plastic. And it’s cheaper than the other one! Lots of options if you like this stuff.

https://backalleycreations.com/collections/elvira-house-of-horrors-pinball-mods/products/red-dripping-blood-shooter-housing-mod
23B99169-DBB3-4EBC-A28B-F5E16BD39BE9 (resized).jpeg23B99169-DBB3-4EBC-A28B-F5E16BD39BE9 (resized).jpeg

#1612 2 years ago

The battle of the bloody shooter rods has begun!

#1613 2 years ago
Quoted from GreenMachine19:

The battle of the bloody shooter rods has begun!

Ha! Fun fact… Back Alley Matt is the guy who molded the toys on Halloween. So, support the guy that made the peek-a-boo Michael!

#1614 2 years ago

I like this one.

Quoted from Mudflaps:

I have this one on Elvira. It’s cast resin and hand painted vs a flat plastic. And it’s cheaper than the other one! Lots of options if you like this stuff.
https://backalleycreations.com/collections/elvira-house-of-horrors-pinball-mods/products/red-dripping-blood-shooter-housing-mod
[quoted image]

#1615 2 years ago

This looks fun to play. Hopefully I can find one.

#1616 2 years ago
Quoted from Mudflaps:

Ha! Fun fact… Back Alley Matt is the guy who molded the toys on Halloween. So, support the guy that made the peek-a-boo Michael!

Matt’s stuff is awesome. I have the turtle slime version of it on my turtles.

8FA7976A-C639-48C0-8B5A-D3B3AB9C4792 (resized).jpeg8FA7976A-C639-48C0-8B5A-D3B3AB9C4792 (resized).jpeg9FC3EC38-07BF-4114-B4AE-70274E6B7D8F (resized).jpeg9FC3EC38-07BF-4114-B4AE-70274E6B7D8F (resized).jpeg
#1617 2 years ago

My machine is still unplayable I replaced the computer today. It’s still crashing. Today it looks the box in the back left went out completely. The led isn’t coming on anymore. When I boot the machine now it looks like the power supply, the board on the right (power distribution board), and the amp are powering on. I attached a picture of the box that doesn’t seem to be receiving power anymore.

4DE0D9D2-C9C8-48DB-8A17-AD5E21D7AF14 (resized).jpeg4DE0D9D2-C9C8-48DB-8A17-AD5E21D7AF14 (resized).jpeg
11
#1618 2 years ago

Christmas is coming but Halloween isn’t over yet.

66948ADB-11DD-440F-AB73-CD2BEAD139C9 (resized).jpeg66948ADB-11DD-440F-AB73-CD2BEAD139C9 (resized).jpeg
#1619 2 years ago
FB_IMG_1637130370064 (resized).jpgFB_IMG_1637130370064 (resized).jpg
#1620 2 years ago

I'm so excited as it's looking very promising that my game will hopefully be on the line shortly but sadly haven't gotten my invoice yet and I'm #159. Emailed Morgan this morning and she said it could be a week or two and I don't understand as it was stated 144 was the last number I heard on the line. I'm dying to pay for this game so I can have it for Christmas

#1621 2 years ago

#128 should have been delivered this morning - no call yet. On calls all day until now so now I'm thinking about it! Hopefully have it up before EOD.

10
#1622 2 years ago
Quoted from radfordian3505:

I'm so excited as it's looking very promising that my game will hopefully be on the line shortly but sadly haven't gotten my invoice yet and I'm #159. Emailed Morgan this morning and she said it could be a week or two and I don't understand as it was stated 144 was the last number I heard on the line. I'm dying to pay for this game so I can have it for Christmas

50 on the line just waiting for Pinotaurs! They are supposed to be here any day. I have been informed me yelling doesn't create boards faster lol.

#1623 2 years ago
Quoted from SpookyLuke:

50 on the line just waiting for Pinotaurs! They are supposed to be here any day. I have been informed me yelling doesn't create boards faster lol.

I blame Ben Heck!

#1624 2 years ago
Quoted from SpookyLuke:

50 on the line just waiting for Pinotaurs! They are supposed to be here any day. I have been informed me yelling doesn't create boards faster lol.

Thank you for your response luke and totally understand your frustration as I know you guys are working your tails off.

15
#1625 2 years ago

Mmmmmm butter (#128)

0E8E77FE-B1EE-4932-AD21-FAE3DA701D55 (resized).jpeg0E8E77FE-B1EE-4932-AD21-FAE3DA701D55 (resized).jpeg3A03F01C-F8D2-4EE8-934F-FF71FCEC23DC (resized).jpeg3A03F01C-F8D2-4EE8-934F-FF71FCEC23DC (resized).jpeg

Edit - powder used is the same as the one Rob Stone uses on pirates. It’s one of my favorite powders out there and glad to have it back here. Identical to what jjp uses on hobbit Smaug edition.

582D73FE-A4D1-43FD-BF72-4E45F7753429 (resized).jpeg582D73FE-A4D1-43FD-BF72-4E45F7753429 (resized).jpeg

Spooky learning from the Rick and morty decal damage - now they include metal stand offs and felt protector Ala jjp. Nice job spooky

91FF8504-DA40-4801-901C-E65101B48C25 (resized).jpeg91FF8504-DA40-4801-901C-E65101B48C25 (resized).jpeg

Spooky please stop shipping with the topper on. Pieces fell off during shipping and left with this. Hopefully they can be plugged in again and I’m sure you’ll replace if they don’t but same thing with my Rick and morty.

But that butter - damn does it look good compared to what I saw at helicon which is the standard. It just pops so much! Absolutely gorgeous. I wish I had more room just to display it by itself

10A7A68A-79ED-43B3-8CDF-E662B8B03DBB (resized).jpeg10A7A68A-79ED-43B3-8CDF-E662B8B03DBB (resized).jpeg1CF8363E-30E5-438A-9719-2F760BDB625C (resized).jpeg1CF8363E-30E5-438A-9719-2F760BDB625C (resized).jpeg

DA3D058E-04C9-491F-8426-9EDD300F8FD4 (resized).jpegDA3D058E-04C9-491F-8426-9EDD300F8FD4 (resized).jpeg281BEEFA-3EBE-45B5-97C2-970AA9EDEF47 (resized).jpeg281BEEFA-3EBE-45B5-97C2-970AA9EDEF47 (resized).jpeg

7F4250AB-8C9E-494D-9350-716AAEE0E7E5 (resized).jpeg7F4250AB-8C9E-494D-9350-716AAEE0E7E5 (resized).jpeg7E8EB9AB-20B2-4912-82C6-A68CDFB0735B (resized).jpeg7E8EB9AB-20B2-4912-82C6-A68CDFB0735B (resized).jpeg626F7465-340A-4D07-BFDA-DA1A7991E204 (resized).jpeg626F7465-340A-4D07-BFDA-DA1A7991E204 (resized).jpeg

C5387E58-8B16-465F-BED9-43018B17F69A (resized).jpegC5387E58-8B16-465F-BED9-43018B17F69A (resized).jpeg

Again I never buy butter - always thought it didn’t make a difference even after seeing it in person. I went to play Halloween a few months ago and came away with the normal art looking flat so I opted for butter and this is exactly what I was expecting with the pop. I could have sworn my rick and morty non butter popped just as much though so maybe it’s just a Halloween thing but very happy with the decision

So plays really well. No issues thus far. The sound/audio quality of the speakers is unbelievable. It sounds even better than my upgraded speakers on jjp. Really makes a difference in a game so reliable on audio to bring you in.

#1626 2 years ago
Quoted from delt31:

Mmmmmm butter
[quoted image][quoted image]
Edit - powder used is the same as the one Rob Stone uses on pirates. It’s one of my favorite powders out there and glad to have it back here. Identical to what jjp uses on hobbit Smaug edition.
[quoted image]
Spooky learning from the Rick and morty decal damage - now they include metal stand offs and felt protector Ala jjp. Nice job spooky
[quoted image]
Spooky please stop shipping with the topper on. Pieces fell off during shipping and left with this. Hopefully they can be plugged in again and I’m sure you’ll replace if they don’t but same thing with my Rick and morty.
But that butter - damn does it look good compared to what I saw at helicon which is the standard. It just pops so much! Absolutely gorgeous. I wish I had more room just to display it by itself
[quoted image][quoted image]
[quoted image][quoted image]
[quoted image][quoted image][quoted image]
[quoted image]
Again I never buy butter - always thought it didn’t make a difference even after seeing it in person. I went to play Halloween a few months ago and came away with the normal art looking flat so I opted for butter and this is exactly what I was expecting with the pop. I could have sworn my rick and morty non butter popped just as much though so maybe it’s just a Halloween thing but very happy with the decision

That is one heck of a collection! We were just talking about a solution for those topper pieces this morning!

#1627 2 years ago
Quoted from SpookyLuke:

50 on the line just waiting for Pinotaurs! They are supposed to be here any day. I have been informed me yelling doesn't create boards faster lol.

How is mine coming along (#138)? Am I waiting for a MPU too?

#1628 2 years ago

World exclusive….. video of the topper was of course top priority haha

Topper fixed btw - super simple to just connect the pieces back together. Thanks spooky.

It does sound like a buzz saw in that video but I haven’t seen the topper so a complete knife stab yet and the game when played does drown that sound out although I’m sure someone smarter than me with this stuff can figure a way to make it quiet

#1629 2 years ago

Added a nice color matched accessory from pinball life

20211129_222418 (resized).jpg20211129_222418 (resized).jpg20211129_222627 (resized).jpg20211129_222627 (resized).jpg
#1630 2 years ago
Quoted from delt31:

World exclusive….. video of the topper was of course top priority haha

Topper fixed btw - super simple to just connect the pieces back together. Thanks spooky.
It does sound like a buzz saw in that video but I haven’t seen the topper so a complete knife stab yet and the game when played does drown that sound out although I’m sure someone smarter than me with this stuff can figure a way to make it quiet

looks like Jason is paddling a canoe... with a knife!

#1631 2 years ago
Quoted from Morgoth00:

Added a nice color matched accessory from pinball life [quoted image][quoted image]

I ordered one...The most expensive pingulp ever..lol

14
#1632 2 years ago

Getting bored waiting on number 168 to be built so I got this to hold me over for a few weeks.

25D4DDEB-0E4F-4708-BEA9-4B2FE35E2EC3 (resized).jpeg25D4DDEB-0E4F-4708-BEA9-4B2FE35E2EC3 (resized).jpeg
35
#1633 2 years ago

Code 1.04 for Halloween and Ultraman will drop Friday evening!
Heavy on Bug fixes for HW. Following update will be heavy on content again!
Heavy on content for Ultraman clips, meters, sound effects, callouts, text, etc!

Should have many of the major HW bugs solved.

#1634 2 years ago
Quoted from SpookyLuke:

Code 1.04 for Halloween and Ultraman will drop Friday evening!
Heavy on Bug fixes for HW. Following update will be heavy on content again!
Heavy on content for Ultraman clips, meters, sound effects, callouts, text, etc!
Should have many of the major HW bugs solved.

#1635 2 years ago

Great news on the update. Getting to the point where I can start to progress through modes skill wise, and the bugs are getting in the way a bit. Looking forward to it.

#1636 2 years ago

All I want for Christmas is squashed bugs!!!

#1637 2 years ago

My $3 pingulp mod!

609D1905-C9A8-4F60-89C6-082DB805DB7C (resized).jpeg609D1905-C9A8-4F60-89C6-082DB805DB7C (resized).jpeg
#1638 2 years ago

Looks good! Please elaborate.

#1640 2 years ago
Quoted from Mudflaps:

My $3 pingulp mod![quoted image]

I'm curious what the KISS box is??

#1641 2 years ago
Quoted from finnflash:

I'm curious what the KISS box is??

Ha, that was a gift from a family friend. She hand painted a white cabinet with some Kiss pinball stuff on it. I keep my random pinball shit in there.

image (resized).jpgimage (resized).jpg
#1643 2 years ago

#108 delivered today. Has anyone else had a problem getting the glass back in? My glass will hit the stop on the left side before the right side about 1/4 inch. The lockdown bar will run into the bottom of the glass and not go all the way down. I am no sure how they got the glass in. I have measured both pieces of wood were the glass stops at the top and both are the same. I have measured down from the stops to the lockdown bar bracket and both are the same. There is no resistance when sliding the glass in. You can definitely tell when sliding the glass in the left side always goes ahead of the right side like the glass is going in cockeyed? I removed the trim piece to get a better picture and check to see if anything was stuck in there. Any ideas?

IMG_0326 (resized).JPGIMG_0326 (resized).JPGIMG_0327 (resized).JPGIMG_0327 (resized).JPGIMG_0328 (resized).JPGIMG_0328 (resized).JPGIMG_0329 (resized).JPGIMG_0329 (resized).JPGIMG_0333 (resized).JPGIMG_0333 (resized).JPG
#1644 2 years ago

Is there any anti rattle tape y'all would recommend? Many seem to be sold but I was wondering if maybe some brands just fit better for this particular game.

#1645 2 years ago
Quoted from SpaceFury:

#108 delivered today. Has anyone else had a problem getting the glass back in? My glass will hit the stop on the left side before the right side about 1/4 inch. The lockdown bar will run into the bottom of the glass and not go all the way down. I am no sure how they got the glass in. I have measured both pieces of wood were the glass stops at the top and both are the same. I have measured down from the stops to the lockdown bar bracket and both are the same. There is no resistance when sliding the glass in. You can definitely tell when sliding the glass in the left side always goes ahead of the right side like the glass is going in cockeyed? I removed the trim piece to get a better picture and check to see if anything was stuck in there. Any ideas?[quoted image][quoted image][quoted image][quoted image][quoted image]

Its not the ol "push the glass down to get it in the top" situation?

#1646 2 years ago

Ok ,I’m fine if we’re not getting “don’t fear the reaper” ….as long as Bug,Luke,and Charlie film a video driving around Benton ,blowing a J while talking about Mr Riddle then post it here .The balls in your court boys . Legend status awaits you !

#1647 2 years ago
Quoted from SpaceFury:

#108 delivered today. Has anyone else had a problem getting the glass back in? My glass will hit the stop on the left side before the right side about 1/4 inch. The lockdown bar will run into the bottom of the glass and not go all the way down. I am no sure how they got the glass in. I have measured both pieces of wood were the glass stops at the top and both are the same. I have measured down from the stops to the lockdown bar bracket and both are the same. There is no resistance when sliding the glass in. You can definitely tell when sliding the glass in the left side always goes ahead of the right side like the glass is going in cockeyed? I removed the trim piece to get a better picture and check to see if anything was stuck in there. Any ideas?[quoted image][quoted image][quoted image][quoted image][quoted image]

Please email service or call service. Had one of these recently at geeks mania and it was an easy fix. Just the tabs under the lockbar bent slightly wrong.

#1648 2 years ago
Quoted from Kkoss24:

Ok ,I’m fine if we’re not getting “don’t fear the reaper” ….as long as Bug,Luke,and Charlie film a video driving around Benton ,blowing a J while talking about Mr Riddle then post it here .The balls in your court boys . Legend status awaits you !

I think they should do both

#1649 2 years ago
Quoted from Kkoss24:

Ok ,I’m fine if we’re not getting “don’t fear the reaper” ….as long as Bug,Luke,and Charlie film a video driving around Benton ,blowing a J while talking about Mr Riddle then post it here .The balls in your court boys . Legend status awaits you !

Oh man...Charlie would have to play the part of Officer Brackett. Bug and Luke pull over to talk to him trying to be all nonchalant. LMAO. I am 100% in for making the drive over to be the camera man.

pasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).png
27
#1650 2 years ago

Just picked up #111. Ready to flip away till late night.

HW.pdfHW.pdf
Promoted items from the Pinside Marketplace
5,900 (OBO)
Machine - For Sale
Nipomo, CA
There are 16,873 posts in this topic. You are on page 33 of 338.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/halloween-owners-threadhes-coming-home/page/33?hl=fsumassey and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.