Guns N' Roses (CE)
Jersey Jack, 2020
Guns N' Roses (LE)
Jersey Jack, 2020
Guns N' Roses (SE)
Jersey Jack, 2020You're currently viewing posts by Pinsider retrogamer74.
Click here to go back to viewing the entire thread.
I just picked up a GNR LE yesterday. Its my first JJ pin so a couple of noob questions.
1) Are you supposed to leave the felt cabinet protectors on when installing the legs or are those thrown out?
2) I found a hex fitting lodged inside the VIP Entrance. It obviously didn't belong there but I couldn't find anywhere on the table or cabinet where it was missing from. Any ideas?
Thank you and Happy Thanksgiving!
Michael
image0 (resized).jpegimage1 (resized).jpegQuoted from LTG:1 ) Yes
2) Looks like inside cabinet secures a head bolt the metal plate pivots on.
LTG : )
Thanks LTG! I checked and both head bolds are securely attached with a hex. Those hexes do look the same as the one I found inside the VIP Entrance. Maybe an extra one fell in at time of assembly.
Are the felt leg protectors really required or optional? I've never used anything like that on my Stern pins and have not had issues with cabinet damage.
Thanks,
Michael
Quoted from Vespula:If you have Liors skull mod then you have to remove the felt or it won't sit over the leg. Ask me how I know.
Also the legs were more stable without the felt imo and there are metal brackets on the cabinet so getting them right against the legs made it more stable.
I know this it contrary to LTG post but that's experience... No felt.
Thanks Vespula. I have the skull mod on its way from LSoG so I will probably leave the felt protectors off. I don't want to run into any fitment issues.
Michael
You're currently viewing posts by Pinsider retrogamer74.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/guns-n-roses-troubleshooting-?tu=retrogamer74 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Wethersfield, CT
is the plastic shield in the back right by the drumsticks supposed to be angled this way? It seems to me that it gets in the way of the ball as it travels along the drumsticks.