I also did the side rails but don't have those pics in my iPad I'll update better shots later
You're currently viewing posts by Pinsider Iamdarras.
Click here to go back to viewing the entire thread.
There red .. Just a phone shot Don't think orange really goes with the color scheme IMO. It is possible to do it in orange though
Quoted from Nelly:Looks like hydroprinting to me. Its pretty awesome stuff. I did this to some ramps and flipper bats to make them look like wood grain in the game I am building.
yup totally -- i used a two part automotive clear coat for the lockdown and side rails of protection. I though it was pretty easy to do.
Wood Flipper Bat 2.jpg 22 KB
Wood Ramp 3.jpg 44 KB
Wood Ramp 2.jpg 35 KB
Quoted from DrMark12PA:I'm trying to figure out a good way to light up the left upper corner green circle that is the end of the snake ramp. Has anyone done this? I'm considering adding some 6 SMD green pads
http://www.cometpinball.com/product-p/6smd12vpad.htm
or trying a 12v strip
http://www.cometpinball.com/product-p/3smd12vstrip.htmGNR green circle.jpg 29 KB
GNR green circle-33.jpg 29 KB
Green Led strip. I ran one down the entire snake. RGB LED strips 50/50 the white wire to 12v and the ground the green
You're currently viewing posts by Pinsider Iamdarras.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/guns-n-roses-mods?tu=Iamdarras and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.