Machines sent to Japan did have shaker motors in them that were installed at the factory. It was to satisfy some nuances with Japanese import regulations although i don't believe there was any special code written for them.

This is my GNR doormat...

A8622D24-2846-452B-8891-2B94E8DC87E9 (resized).jpeg

I’ve got one - sent you a pm

4ACEC575-B7F9-40AF-B5F4-2289322D4066 (resized).jpeg

I have a problem with the Extra Ball light at the top of the guitar feature. It's stopped working. I have tried a different globe plus swapped the globe holder with the working one next to it and neither of them are the problem. Any suggestions??

I know some of them did. I had a German delivered game at one stage that had the headphone jack and volume control on the front.

Ive got an issue with the Extra Ball light up the top of the guitar neck near the saucer. It doesn't work. I have checked the globe and the holder for it and they aren't the issue (I tried switching the working one next to into the slot and it doesn't work).

Could this then be an issue with something on a board somewhere? If so where and what should I be looking at? I've got the skills to solder/desolder on boards but not a lot of skill in reading schematics to chase down the relevant section of the board to look at.