Does anyone have a picture of how these plastics are connected? Hex spacer? Also the blue one seems to bend a lot up over the scoop when I tried to rest fit them. Worried about it breaking.

B44B3ABE-237E-43EB-9F97-0B4B601C4FF8 (resized).jpeg

I wonder if the top of my scoop just needs to be bent down from all the years of play. It’s as high as the post behind it.

F559E0C6-C016-4275-B8E2-0F76E0DA7013 (resized).jpeg

I replaced mine. Just follow the wires back from it and disconnect them. Should come from a Z connector. You might have to cut a few zip ties but easy to add new ones when you are done. Then remove the whole drop target mech which is only 4 screws. It will be easy to swap once it’s out.

362CACC1-49BB-4633-9BD8-BF9DD55EF436 (resized).jpeg