(Topic ID: 167803)
You're currently viewing posts by Pinsider sputnik.
Click here to go back to viewing the entire thread.
1 week later
1 week later
Yes a CETME. I like the wood on the 93, may have to change mine. Do you know of a source for 93 magazines? The real ones seem to be made of an exotic metal or something. Hard to find and lots of $$$
Pro mags work about 50/50 for me. Not my first choice. The $80 is what I'm seeing also. When they can be found.
1 week later
5.56x45 and 9mm in the picture. I also have one in .308. I have been repressing the itch for .458 or .50 Beowulf. So far anyway....
Ammo prices are the best I have seen in years. Check out gun-deals.com nothing for sale there just links to add. Federal M855 or M193 can be had for less than 25 cents a round shipped. I actually bought some .22 LR for the first time in over 8 years, it can be found for less than 5 cents now. Still a double price...
I love my 74. I just wish you could still get 7N6 for less the 10 cents. I just feed it Tula and Wolf, they are dirty and stink. But the AK just keeps eating them.
1 month later
Quoted from navajas:Looks like they may have tried to utilize some of the same "technology" as my Springfield, but without the parts clearly labeled, how do you know where to hold it?
The round hole in the loud end is best when pointed away from the user.
2 weeks later
2 weeks later
2 weeks later
3 months later
8 months later
Hindsight 20/20 yep... Wish I had bought more 7N6 and bakelights, and other inexpensive com-block stuff when it was everywhere.
Quoted from Fulltilt:What? AK 74 mags?
Dang, do I need to start putting mags back in the safe again??!
74 mags are $45 not talking about tapco. No longer $12 or less than $100 for 7N6 by the case.
4 months later
2 weeks later
Sometimes work takes me to Rogersville. It not too far. I'm not aware of any SA shooting clubs close by.
3 weeks later
I use a Hornandy lock and load for my loading. It is in the garage, the pins are in the game room. I need to pick up a set of dies for .450 Bushmaster. I load .45acp .45 colt, .454 casual,. 44 mag, .38/.357, and 10 mm.
3 months later
2 months later
1 month later
Quoted from Strummy:Does anyone have any recommendations for a good, comfortable, concealment holster for a Glock G30? It's a compact 45 but its still a lot bulkier than the ease of carrying my Sig p238. I've used a swap rig which is ok but I'm looking for something better. Inner preferred.Thanks
A Fobus GL4 works with a G21 or G30. I also have hand made custom pancake holster for my G30.
Quoted from Fulltilt:You semi-auto people you.
Just put in a Sticky and forget it's even there.
[quoted image]
I love my little 5 shot S&W as well. For carry I want a .45, that is what I trained with. That is what I like. I mean what you wear, needs your trust and your skill to use. Like Ford/Chevy... It is what works for you. Most importantly what can you make work should you need it. Hopefully nobody ever needs a it.
2 weeks later
Quoted from Travish:If anyone is thinking about getting into 80% AR receivers I can 100% recommend 5d tactical’s system. A router and their jig system and you can be a pro.[quoted image][quoted image]
Are you using an end mill in your router?
2 months later
Quoted from pin-pimp:for any of you rimfire shooters out there FYI i own Blackdogmachinellc.com not something i normally reveal but this is a safer thread for the topic!
now you know where and how other pin mods and parts are getting made
Thanks for the info, I will check out your site.
I took one of my Ruger AR 556 out yesterday. I put the Franklin binary trigger in it. I put 300 thru it. The binary will eat, the second tap is not easy to keep on target. It is not as much fun as a lightning link but worth the cost. I have a complete lower on backorder for 2 weeks now I wonder how long that will take in these times.
1 month later
Quoted from Fulltilt:Went in to pickup my transfer and looked over in the "consignment" case.
That's always a mistake....
My first .454 Casull. Sweet!
[quoted image]
[quoted image]
Mine kicks like a mule, but I love it. I do some hand loads with 250 grain XTP`s. That tames it a bit.
2 months later
Quoted from EJS:Has anyone on here have any experience with the Franklin Armory Binary trigger?
Thinking of picking one up but $430 a little steep for a trigger group.
They function very well. I like the 45 degree safety. A single shot, a quick follow up shot, or a mag dump. Your choice. Easy install with clear instructions.
3 months later
Quoted from Daditude:That looks like exactly what i need. Can you compare it to any other glock models, or do you just own the model 30?
Top to bottom. G34, G21, and G30.
20201121_074208 (resized).jpg 2 months later
1 month later
Quoted from Fulltilt:New addition to the clan. 1943 Winchester. All cleaned up and perty.
[quoted image]
Nice score.
3 months later
1 week later
1 month later
Yes, picked up 2 optic ready Ar`S last week. Out the door $1002.00. Plenty of magazines fair prices, ammo still high.
3 months later
2 weeks later
2 months later
3 months later
3 weeks later
You're currently viewing posts by Pinsider sputnik.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
