I picked up a Gulf Pinball power supply for my system 11A Fire! I have emailed the seller/distributor for a copy of the owner’s manual/installation instructions to no avail.
My question/problem is that I have a LED PinScore display installed in the game. Somewhere I read with these new power supplies that it is recommended to pull the high voltage fuse for the LED displays since the PinScore displays only need 5v.
By doing this you prevent damage to the display and decrease the chance for shock.
Marco Specialities sells the exact board (without Gulf Pinball stamped on the board.) Part number PT-8345.
Does anyone have a copy of the spec sheet or know which fuse to pull when running LED displays.
I have attached a couple of photos of the board for reference.
Thanks Guys