Batman 66 (LE)
Stern, 2016
Batman 66 (Premium)
Stern, 2016
Batman 66 (Super LE)
Stern, 2016
Black Knight Sword of Rage (Premium)
Stern, 2019
Black Knight Sword of Rage (Pro)
Stern, 2019
Deadpool (Premium)
Stern, 2018
Deadpool (Pro)
Stern, 2018
Elvira's House of Horrors (Premium Edition)
Stern, 2019You're currently viewing posts by Pinsider Markharris2000.
Click here to go back to viewing the entire thread.
Quoted from JSC:I just ordered some speaker light kits and kenwoods for my Sterns. I am not handy with my pins….the process seems easy, but the one piece I’m not sure about is the actual wire connections to the speakers. This part requires some soldering, correct (something I have never done before).
Very easy. Watch a soldering YouTube or two, and you will be fine. Just make sure the solder is shiny when you are done to assure a good solid connection.
Quoted from northerndude:Hey all, I am finally getting to my lights and speaker upgrade because my GZ is here. Trying to fire up my lights, I have no power leaving my bill validator plug for my deluxe light kit - Anyone know why? setting? fused differently?
(In case anyone reading this thread wants some guidance on similiar issue). Its not a setting. Probably time to get your meter out and some old fashioned troubleshooting. Start with the AC cover off and check those two pins in the power connector. You should see 120VAC. Make sure that the AC connector is installed tight to the cable that feeds the AC power brick that Doug provides. That power brick takes the 120VAC and delivers 12vdc. Worth checking the output of the power brick to confirm its 12vdc. Another step is to make sure that your 5-pin inrow header pins (that feeds each speaker assembly) is not inserted backwards: Pin1 needs to line up on both sides. Look for the tiny arrow.
You're currently viewing posts by Pinsider Markharris2000.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/guide-to-converting-spike-2-pro-prem-to-le-speakers-lighting?tu=Markharris2000 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fremont, CA