My machine came NIB with Insider Connected. Looking to move insider connected to the coin door and add in a plastic apron art. Haven't had luck finding Premium/LE plastics -- anyone ever buy one aftermarket or have an original one for sale?

I installed one last night with a friend in his Pro. It was fairly easy. Just had to take off the slanted plastic piece behind the scoop sign (pay attention to which post goes where as all three are different sizes — we didn’t and it embarrassingly took us a bit to figure out how it was angled during reinstall — the metal posts might need a 1/4” wrench to loosen it if too snug for hand loosening), and the plastic piece beneath it. Not all of the metal posts need to come off that bottom piece. Two of them have screws underneath and aren’t attached to anything under it. The scoop sign is attached to the bottom plastic piece and doesn’t need to be taken off. Once the bottom plastic piece is able to come off, you’re able to access the two screws behind the scoop. Take off the two screws and slide the scoop protector over the scoop at a bit of an angle. Goes on fairly easily — just needs a bit of a snap into place. Add screws back (over the new protector, add bottom plastic piece and fasten, then the angled piece with the three different sized metal posts and you’re back in business.