Has anyone else experienced two balls being ejected into the shooter lane at times? We have a game out on route that sometimes kicks two balls out at once. It isn't a switch problem where it double ejects, it is actually two balls coming out at once. What I have found is that it seems the weight of all six balls pushes the first ball up too far sometimes. All of the optos are lit, as well as the fault opto since the first ball is just a bit higher. This causes two balls to come out. It only happens once in awhile. I dropped down the trough a little bit to lessen the angle, hoping this would keep the balls from pushing so hard. Just curious if anyone else has seen any issues with this.

IMG_3864 (resized).jpg

Thanks, it isn't Quills quest. I'll try the lower ball eject power.

The more I was thinking about it last night, I don't think it was the eject power. I was popping the balls out manually with the coil plunger. Doing this manually was still popping the two balls out, but only when they weren't lined up in the trough properly. Meaning they were pushed in just a touch too much, making ball number one up in the air a little bit.

Going to try swapping them out, I think I was overthinking the trough issue. May be just as simple as magnetized balls. Thanks for the replies guys.