Quoted from Cherga:I am able to get up the ramp now after adjusting the EOS Switch on the right flipper. Also, the ramp itself appears to have been bent by a previous owner in an attempt to achieve the same thing I was. I do however have an issue with the coil on the ramp. When activated its humming pretty loud and the coil gets hot, not to the point of melting the sleeve or anything like that it doesn’t seem right to me. The EOS Switch makes contact at rest as does the leaf switch. When activated, both switches break contact. Another issue I’m having a themachine is randomly locking up/resetting and this has only started happening since adjusting the right flipper coil switches. The switches are functioning properly... when activated EOS Switch breaks contact first followed by the secondary switch making contact. Any ideas or insight is appreciated.
Any resolution on your issues here? Did you do the ground mods? Did you unplug the reset board? Curious since I face this with my raven from time to time. Usually she behaves but every once in a while there will be a reset.