(Topic ID: 142878)

Gtb. Criss Cross coin door button not working

By Robo1

8 years ago



Topic Stats

You

Linked Games

#1 8 years ago

Hello everyone,
Cant seem to figure this one out. I am almost finished getting this game out of the dust. I can get it to start by manually triggering the restart coil on the relay bank, but I cant seem to find where the problem is with the coin door button. All the wires are intact, match unit wires are fine, i really believe the relay bank coil switches are fine......
any help would be great!
Thanks,
Rob

#2 8 years ago

Are the wires screwed into cab next to the coin door with the matching wires from the bottom board?

Credit on the replay unit and the zero position switch is closed?

#3 8 years ago

Yes, The wires next to the coin door are aligned and screwed in tight, credits are on the game, zero position (on match unit?) i will check again but i just went over the switches on the unit. The game does start and play just perfect if i manually trigger the restart relay. There must be a gap somewhere in the power to that relay.
Is there a good way to jump the wires next to the coin door so I can confirm that the problem lays elsewhere?

#4 8 years ago

Look at the credit (replay) unit. The replay button on the coin door only works when there are credits on the replay unit.

#5 8 years ago

The path to energize and trip the SB relay includes:

- a make/break switch on SB (normally closed)
- the Anti-Cheat switch (normally closed)
- the replay button (closes when pressed)
- zero pos. on the replay unit (closed when there's a credit)
- switch on W (normally closed)
- switch on Ball Release (normally closed)

so could be any of the normally closed switches being open/dirty, and worth checking each one.

#6 8 years ago

Dirt Flipper!
Thank you, I will check them all.......

#7 8 years ago

Right on! Thanks Dirtflipper, the switch in the start relay was not making clean contact.

#8 8 years ago

Excellent. First one on the list then.

Promoted items from Pinside Marketplace and Pinside Shops!
900 (OBO)
Machine - For Sale
Murrells Inlet, SC
1,750 (OBO)
Machine - For Sale
Alameda, CA
Great pinball charity
Pinball Edu

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/gtb-criss-cross-coin-door-button-not-working and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.