*** Updated price....limited time only!*** Act now quantities are limited!

Hakko 808 Desolder Kit Group Buy for pinside.com

We had a nice response from the pinside community on the Hakko FX-888D group buy we offered a few months back. A lot of you were looking for the Hakko 808 Desolder Kit as well. I am pleased to announce a group buy for the Hakko 808’s.

The Hakko 808 is a handy, portable desoldering tool with a built-in vacuum pump. No separate station is required.
• thin, comfortable grip and low vibration
• simple and inexpensive pump maintenance
• adjustable temperature control (380°C - 480°C / 715°F - 895°F)
• kit includes Desolder gun with 1mm nozzle, Carrying Case, Hot Sock, filter pipe, cleaning pins for nozzle and heating element, 3 pre-filters, 4 ceramic paper filters and a wrench.

Here's the plan to get the deal:
1. Reply to this thread and let us know you want to see what all the fuss is about.
2. One of us here at B&D staff will forward the price and coupon code via PM, needed to get the deal on our website or by phone.
3. Go to our site - URL will be in the PM, or call 800.458.6053 to get the deal (code required) from the PM. If ordering by phone we'll take 15% off the rest of your order for all solder, components and accessories.
4. Post back here how happy you were with the price, service, packaging, shipping time, etc. Email me if something is not 100% to your liking or if you have any issues.
5. Enjoy your new Hakko 808 desolder gun

Regards,
Matt

808KIT.jpg

_{Post edited by bdtom : Dates adjusted}

PM's sent. Keep 'em coming.

Ghostrachel-
According to my calculations, .156" is like 3.97mm. That is pretty big. The largest nozzle available for the 808 is the A1396 which is 2.3mm wide. The A1002,3,4 are all equal to or smaller than the A1005 which is included w/ the 808KIT. The A1396 is $13.56 with your discount. If you want to order w/this nozzle either call me at 800-458-6053 or email me at [email protected] I hope this helps.
Tom

It's not unusual

No need to be bummed!! The FX-888D buy is still going on too. I'll PM you the details on both.

Some of you have expressed interest to for the Hakko 633-01 stand/holder for the 808. I am currently offering these at $23.36 to the Pinside crew to ship free with the 808. My p/n on these is
105-TL-063301.

105_TL_063301_1.jpg

Your Welcome Otto- I'm glad you like your new unit. The Hakko 808 Desolder Gun has long been a fan favorite.

Some of you have asked if this is still going on. Yes!! We will continue this offer through the end of this week for the 808 Desolder gun as well as the FX-888D solder station. Thank you to all who have participated. I hope you are enjoying your new Hakko.

I want to thank all the pinsiders who took advantage of our group buys on the Hakko FX-888D digital solder station and the Hakko 808 Desolder Kit. I hope you are enjoying your new purchase!!

We will be at the 2013 Pinfest in Allentown next month. Stop by and say hello. We will be bringing more Hakko soldering equipment, Wera tools and other goodies. I look forward to meeting you.

For those of you that 'missed out' on the FX-888D or 808KIT buys but are still interested, hit me up for the details. I'll take care of it for you.

I’m getting some PM’s asking if we would extend the Pinside group buys for the Hakko FX-888D digital solder station and the 808KIT desolder gun. The answer is a resounding yes!!!!!!

We are going to extend this offer thru the Pinfest in Allentown. If any of you are on the fence about it and will be in Allentown, stop over at our booth and “try before you buy”. We will have demos available on the FX-888D station, the 808 Desolder Gun, as well as the FX-601 Adjustable Temperature Solder Iron.

PM me for the details on any of the above items. See you at Pinfest!!!!

We have extended the group buys on the 808, FX-888D and the FX-601 through May. PM me if you need the details

Hey Pinsiders! We are running another special on the Hakko 808KIT desoldering tool! Check out our special deal!
The B&D Team

Hakko FX888D Digital Solering Station group buy!

So we are offering a group buy for you pin gurus and techies. We have the Hakko FX888D-23BY solder station at a great price. If you reply to the post that you are interested, I can send you a coupon code . The coupon is for 10% off. You will find that we are the lowest around for soldering stations and accessories. You can also PM me for any additional questions. Below are the details of the Soldering Station.
Free UPS ground shipping the US. Ships same day as purchased.
The Hakko FX-888D is an updated digital version of the popular FX-888 and includes several new features. User selectable preset temperatures and digital calibration simplify user setup and operation, and the new password protection and low temperature alarm provides process control and helps protect against cold solder joints.
- Adjustable temperature control
- Temperature range 120° - 899°F (50° - 480°C)
- Digital display shows °F or °C
- Maintains idle temperature within 1.8°F (1°C) when set to 400 - 899°F (200 - 480°C)
- Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal
recovery
- Password protected temperature setting functionality
- Preset mode allows you to store up to five (5) preset temperatures
- Slender, lightweight ergonomic iron handles
- Compact design takes up less bench space
- Wide selection of tips available for soldering SMD and through-hole applications
- Use with Hakko T18 series tips
- ESD Safe
Model Name FX-888
Part Number FX888D-23BY
FX888D-29BY/P
FX888D-RC/P
Power Consumption 70W / 120VAC
Station
Temperature Range 120° - 899°F (50° - 480°C)
Temperature Stability ±1.0°C (1.8°F)
Temperature Control Closed-loop sensor
Dimensions 100(W) x 120(H) x 120(D) mm
3.9(W) x 4.7(H) x 4.7(D) in.
Shipping Dimensions 242(W) x 178(H) x 242(D) mm
9.5(W) x 7.0(H) x 9.5(D) in.
Weight 2.6 lbs (1.2 kg)
Shipping Weight 4.7 lbs (2.13 kg)
ESD Safe Yes
IPC J-STD-001 Meets or Exceeds requirements
Soldering Iron
Model Name FX-8801
Part Number FX8801-02
Power Consumption 65W / 26VAC
Tip T18 Series
Standard Tip T18-D16 (shape 1.6D)
Tip-to-Ground Resistance < 2 ohms
Tip-to-Ground Potential < 2mV
Heating Element Ceramic
Handpiece Length (w/o cord) 8.5 in. (217 mm) with T18-D16 tip
Cord Length/Reach 3.9 ft. (1.2m)
Weight (w/o cord) 0.1 lb (46g) with T18-D16 tip
OK...back to the deal, once again, with MAP (minimum advertised price) being what it is we need to do the deal covertly.
Here's the plan to get the deal:
1. Reply to this thread and let us know you want to see what all the fuss is about.
2. One of us here at B&D staff will forward the price and coupon code via PM, needed to get the deal on our website or by phone.
3. Go to our site - URL will be in the PM, or call 800.458.6053 to get the deal (code required) from the PM. If ordering by phone we'll take 10% off the rest of your order for all solder, components and accessories and ship everything free.
4. Post back here how happy you were with the price, service, packaging, shipping time, etc. Email me if something is not 100% to your liking or if you have any issues.

So we are offering a group buy for you pin gurus and techies. We have the Hakko FX888D-23BY solder station at a great price. If you reply to the post that you are interested, I can send you a coupon code . The coupon is for 10% off. You will find that we are the lowest around for soldering stations and accessories. You can also PM me for any additional questions. Below are the details of the Soldering Station.
Free UPS ground shipping the US. Ships same day as purchased.
The Hakko FX-888D is an updated digital version of the popular FX-888 and includes several new features. User selectable preset temperatures and digital calibration simplify user setup and operation, and the new password protection and low temperature alarm provides process control and helps protect against cold solder joints.
- Adjustable temperature control
- Temperature range 120° - 899°F (50° - 480°C)
- Digital display shows °F or °C
- Maintains idle temperature within 1.8°F (1°C) when set to 400 - 899°F (200 - 480°C)
- Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal
recovery
- Password protected temperature setting functionality
- Preset mode allows you to store up to five (5) preset temperatures
- Slender, lightweight ergonomic iron handles
- Compact design takes up less bench space
- Wide selection of tips available for soldering SMD and through-hole applications
- Use with Hakko T18 series tips
- ESD Safe
Model Name FX-888
Part Number FX888D-23BY
FX888D-29BY/P
FX888D-RC/P
Power Consumption 70W / 120VAC
Station
Temperature Range 120° - 899°F (50° - 480°C)
Temperature Stability ±1.0°C (1.8°F)
Temperature Control Closed-loop sensor
Dimensions 100(W) x 120(H) x 120(D) mm
3.9(W) x 4.7(H) x 4.7(D) in.
Shipping Dimensions 242(W) x 178(H) x 242(D) mm
9.5(W) x 7.0(H) x 9.5(D) in.
Weight 2.6 lbs (1.2 kg)
Shipping Weight 4.7 lbs (2.13 kg)
ESD Safe Yes
IPC J-STD-001 Meets or Exceeds requirements
Soldering Iron
Model Name FX-8801
Part Number FX8801-02
Power Consumption 65W / 26VAC
Tip T18 Series
Standard Tip T18-D16 (shape 1.6D)
Tip-to-Ground Resistance < 2 ohms
Tip-to-Ground Potential < 2mV
Heating Element Ceramic
Handpiece Length (w/o cord) 8.5 in. (217 mm) with T18-D16 tip
Cord Length/Reach 3.9 ft. (1.2m)
Weight (w/o cord) 0.1 lb (46g) with T18-D16 tip
OK...back to the deal, once again, with MAP (minimum advertised price) being what it is we need to do the deal covertly.
Here's the plan to get the deal:
1. Reply to this thread and let us know you want to see what all the fuss is about.
2. One of us here at B&D staff will forward the price and coupon code via PM, needed to get the deal on our website or by phone.
3. Go to our site - URL will be in the PM, or call 800.458.6053 to get the deal (code required) from the PM. If ordering by phone we'll take 10% off the rest of your order for all solder, components and accessories and ship everything free.
4. Post back here how happy you were with the price, service, packaging, shipping time, etc. Email me if something is not 100% to your liking or if you have any issues.

Hakko FX888D Digital Soldering Station group buy!

So we are offering a group buy for you pin gurus and techies. We have the Hakko FX888D-23BY solder station at a great price. If you reply to the post that you are interested, I can send you a coupon code . The coupon is for 10% off. You will find that we are the lowest around for soldering stations and accessories. You can also PM me for any additional questions. Below are the details of the Soldering Station.
Free UPS ground shipping the US. Ships same day as purchased.
The Hakko FX-888D is an updated digital version of the popular FX-888 and includes several new features. User selectable preset temperatures and digital calibration simplify user setup and operation, and the new password protection and low temperature alarm provides process control and helps protect against cold solder joints.
- Adjustable temperature control
- Temperature range 120° - 899°F (50° - 480°C)
- Digital display shows °F or °C
- Maintains idle temperature within 1.8°F (1°C) when set to 400 - 899°F (200 - 480°C)
- Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal
recovery
- Password protected temperature setting functionality
- Preset mode allows you to store up to five (5) preset temperatures
- Slender, lightweight ergonomic iron handles
- Compact design takes up less bench space
- Wide selection of tips available for soldering SMD and through-hole applications
- Use with Hakko T18 series tips
- ESD Safe
Model Name FX-888
Part Number FX888D-23BY
FX888D-29BY/P
FX888D-RC/P
Power Consumption 70W / 120VAC
Station
Temperature Range 120° - 899°F (50° - 480°C)
Temperature Stability ±1.0°C (1.8°F)
Temperature Control Closed-loop sensor
Dimensions 100(W) x 120(H) x 120(D) mm
3.9(W) x 4.7(H) x 4.7(D) in.
Shipping Dimensions 242(W) x 178(H) x 242(D) mm
9.5(W) x 7.0(H) x 9.5(D) in.
Weight 2.6 lbs (1.2 kg)
Shipping Weight 4.7 lbs (2.13 kg)
ESD Safe Yes
IPC J-STD-001 Meets or Exceeds requirements
Soldering Iron
Model Name FX-8801
Part Number FX8801-02
Power Consumption 65W / 26VAC
Tip T18 Series
Standard Tip T18-D16 (shape 1.6D)
Tip-to-Ground Resistance < 2 ohms
Tip-to-Ground Potential < 2mV
Heating Element Ceramic
Handpiece Length (w/o cord) 8.5 in. (217 mm) with T18-D16 tip
Cord Length/Reach 3.9 ft. (1.2m)
Weight (w/o cord) 0.1 lb (46g) with T18-D16 tip
OK...back to the deal, once again, with MAP (minimum advertised price) being what it is we need to do the deal covertly.
Here's the plan to get the deal:
1. Reply to this thread and let us know you want to see what all the fuss is about.
2. One of us here at B&D staff will forward the price and coupon code via PM, needed to get the deal on our website or by phone.
3. Go to our site - URL will be in the PM, or call 800.458.6053 to get the deal (code required) from the PM. If ordering by phone we'll take 10% off the rest of your order for all solder, components and accessories and ship everything free.
4. Post back here how happy you were with the price, service, packaging, shipping time, etc. Email me if something is not 100% to your liking or if you have any issues.

The B&D Team

PM sent

PM sent

PM sent

PM sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

PM SENT

PM SENT

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

email sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

PM SENT

pm sent

email sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent

pm snet

pm sent

PM SENT

PM SENT

pm sent

pm sent

pm sent

pm sent

pm sent

pm sent