(Topic ID: 41493)

Group Buy on the Hakko 808 Desolder Gun Kit!!!


By bdtom

6 years ago



Topic Stats

  • 798 posts
  • 442 Pinsiders participating
  • Latest reply 3 years ago by ibis
  • Topic is favorited by 13 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 3 images uploaded to this topic. (View topic image gallery).

    2014-01-24 12_56_20-Hakko 808 - Google Search.jpg
    105_TL_063301_1.jpg
    808KIT.jpg

    There are 798 posts in this topic. You are on page 1 of 16.
    #1 6 years ago

    *** Updated price....limited time only!*** Act now quantities are limited!

    Hakko 808 Desolder Kit Group Buy for pinside.com

    We had a nice response from the pinside community on the Hakko FX-888D group buy we offered a few months back. A lot of you were looking for the Hakko 808 Desolder Kit as well. I am pleased to announce a group buy for the Hakko 808’s.

    The Hakko 808 is a handy, portable desoldering tool with a built-in vacuum pump. No separate station is required.
    • thin, comfortable grip and low vibration
    • simple and inexpensive pump maintenance
    • adjustable temperature control (380°C - 480°C / 715°F - 895°F)
    • kit includes Desolder gun with 1mm nozzle, Carrying Case, Hot Sock, filter pipe, cleaning pins for nozzle and heating element, 3 pre-filters, 4 ceramic paper filters and a wrench.

    Here's the plan to get the deal:
    1. Reply to this thread and let us know you want to see what all the fuss is about.
    2. One of us here at B&D staff will forward the price and coupon code via PM, needed to get the deal on our website or by phone.
    3. Go to our site - URL will be in the PM, or call 800.458.6053 to get the deal (code required) from the PM. If ordering by phone we'll take 15% off the rest of your order for all solder, components and accessories.
    4. Post back here how happy you were with the price, service, packaging, shipping time, etc. Email me if something is not 100% to your liking or if you have any issues.
    5. Enjoy your new Hakko 808 desolder gun

    Regards,
    Matt

    808KIT.jpg

    Post edited by bdtom : Dates adjusted

    #2 6 years ago

    Great deal with the FX-888D. Such a step-up from my previous solder gun. Count me in for the 808.

    #3 6 years ago

    I would also like information the 808.

    Thanks!

    #4 6 years ago

    Details please

    #5 6 years ago

    Please send me the info on the 808, thanks!

    #6 6 years ago

    Send me info as well

    #7 6 years ago

    Please send me info on the 808. thanks!

    #8 6 years ago

    Ditto.

    #9 6 years ago

    I'm in, I have always wanted one of these.

    #10 6 years ago
    Quoted from MikeS:

    Please send me info on the 808. thanks!

    Send me info as well.... Also, if combined shipping is an option, I would be interested in shipping in QTY 3, 5, etc....

    Thanks

    #11 6 years ago

    please send info, i am very happy with the last deal. thank you

    #12 6 years ago

    info please.

    #13 6 years ago

    Details also please

    #14 6 years ago

    Details please

    #15 6 years ago

    I'd sure like to know what the fuss is about as well

    #16 6 years ago

    YES! I've been waiting for this. Info me up.

    #17 6 years ago

    Send me the info please

    #18 6 years ago

    Interested!

    ... and shipping cost to Brampton, Ontario, Canada.

    #19 6 years ago

    details please!

    #20 6 years ago

    What's all the fuss, Gus?

    I am interested in the information! Bought an 888, and NEED this

    Chris

    #21 6 years ago

    Please send me the details on this one.

    The other station is awesome and delivery was very fast, nice easy to use website as well, Thanks

    #22 6 years ago

    Oh yeah! Need to know what da fuss iz

    #23 6 years ago

    Please pm with details.

    Thanks!

    #24 6 years ago

    PM's sent. Keep 'em coming.

    #25 6 years ago

    Yo

    #26 6 years ago

    I'm in. Please PM me the fussy details.

    #27 6 years ago

    Can you send info on the 808.

    #28 6 years ago

    Can you tell me which tip is best for doing .156" pins? (A1002, A1003, A1004?) I remember replacing some molex before with a different desolderer and the hole in the tip of the desolderer was too small to fit around them. Thanks.

    #29 6 years ago
    Quoted from ghostrachel:

    Can you tell me which tip is best for doing .156" pins? (A1002, A1003, A1004?) I remember replacing some molex before with a different desolderer and the hole in the tip of the desolderer was too small to fit around them. Thanks.

    I believe it's A1007.

    I read the Hakko 633-01 Iron Holder is handy as well. And I'm planning on getting extra filters: Hakko A1033 Ceramic Filter 10 Pack.

    Just waiting for a PM ...

    #30 6 years ago

    I too would like the info on the 808. Thanks

    #32 6 years ago

    I definately would like to know what the fuss is about. My buddy has one and I am very jealous.

    #33 6 years ago
    Quoted from ghostrachel:

    Can you tell me which tip is best for doing .156" pins? (A1002, A1003, A1004?) I remember replacing some molex before with a different desolderer and the hole in the tip of the desolderer was too small to fit around them. Thanks.

    Ghostrachel-
    According to my calculations, .156" is like 3.97mm. That is pretty big. The largest nozzle available for the 808 is the A1396 which is 2.3mm wide. The A1002,3,4 are all equal to or smaller than the A1005 which is included w/ the 808KIT. The A1396 is $13.56 with your discount. If you want to order w/this nozzle either call me at 800-458-6053 or email me at tom.jones@bdent.com I hope this helps.
    Tom

    #34 6 years ago

    Info please

    #35 6 years ago
    Quoted from bdtom:

    Ghostrachel-
    According to my calculations, .156" is like 3.97mm. That is pretty big. The largest nozzle available for the 808 is the A1396 which is 2.3mm wide. The A1002,3,4 are all equal to or smaller than the A1005 which is included w/ the 808KIT. The A1396 is $13.56 with your discount. If you want to order w/this nozzle either call me at 800-458-6053 or email me at tom.jones@bdent.com I hope this helps.
    Tom

    Tom,

    just sent you an email directly that was included in your PM... IE- QTY...

    #36 6 years ago

    I would like more info on this deal please?

    #38 6 years ago

    Please send me the information as well

    #39 6 years ago

    bdtom Thanks for the info and quick reply!

    #40 6 years ago
    Quoted from bdtom:

    Ghostrachel-
    According to my calculations, .156" is like 3.97mm. That is pretty big. The largest nozzle available for the 808 is the A1396 which is 2.3mm wide. The A1002,3,4 are all equal to or smaller than the A1005 which is included w/ the 808KIT. The A1396 is $13.56 with your discount. If you want to order w/this nozzle either call me at 800-458-6053 or email me at tom.jones@bdent.com I hope this helps.
    Tom

    In this case the .156" refers to the distance between the pins on center, not the diameter of the individual pins, so I won't be needing a monstrous tip. I think the A1007 that OTTOgd pointed me to should do it. Thanks guys!

    #42 6 years ago

    What is the fuss about ?

    #43 6 years ago
    Quoted from bdtom:

    Ghostrachel-
    According to my calculations, .156" is like 3.97mm. That is pretty big. The largest nozzle available for the 808 is the A1396 which is 2.3mm wide. The A1002,3,4 are all equal to or smaller than the A1005 which is included w/ the 808KIT. The A1396 is $13.56 with your discount. If you want to order w/this nozzle either call me at 800-458-6053 or email me at tom.jones@bdent.com I hope this helps.
    Tom

    More importantly than the group deal...

    Your name is Tom Jones?

    Chris

    #44 6 years ago

    Info please.

    #45 6 years ago

    Info please!

    #47 6 years ago

    Please send me the details. Thanks! David

    #48 6 years ago

    Info please...Thanks!

    #49 6 years ago

    I have used one of these and want one.
    Please send me the info.

    #50 6 years ago

    Please send me the info on the 808. Thanks.

    There are 798 posts in this topic. You are on page 1 of 16.

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside