(Topic ID: 99133)

Ground wiring on speakers AFM


By yyyyyikes

5 years ago



Topic Stats

  • 4 posts
  • 2 Pinsiders participating
  • Latest reply 5 years ago by vid1900
  • Topic is favorited by 1 Pinsider

You

Linked Games

Topic Gallery

There have been 2 images uploaded to this topic. (View topic image gallery).

Backbox.jpg
FlipperFid.jpg

You're currently viewing posts by Pinsider yyyyyikes.
Click here to go back to viewing the entire thread.

#1 5 years ago

This may sound like a really silly question...but...

I decided to replace the speakers on my Attack from Mars
as the small tweeter was a bit dodgy.

I noticed when removing the left speaker that the ground
wire was screwed in to 2 of the mounting screws.
It's an odd wire with 4 plates.

2 red plates which are basically the ends of
the wire, and 2 blue plates with a wire running between them
and to the red ends.

3 of these plates were screwed to one corner while
1 of the blue plates was screwed to another.

I guess to me it would just make sense that the ground would
go from one of the speaker corners to the ground nut inside
the back box? Or is this normal?

Thanks in advance.

#2 5 years ago

Ok...so on further inspection - i'm pretty sure this was wired incorrectly.

Maybe grounding isn't necessary - but i found an image on Flipper Fidelity's
site of the wiring perhaps multi-grounding with a cover over the back of the
display unit. I don't seem to have a cover over my board and certainly it isn't
grounded. The cable then does indeed appear to go to the box ground nut.

FlipperFid.jpg

Found another image on google that appears to show both speakers grounded,
which i would have thought was not necessary.

Backbox.jpg

Should i get a cover for the display panel? And should i bother grounding the other speaker?
That would then account for all 4 ends anyhow.

#3 5 years ago

Ordered a DMD insulator anyhow.

Promoted items from the Pinside Marketplace
$ 279.95
Lighting - Led
Pin Stadium Pinball LEDs

You're currently viewing posts by Pinsider yyyyyikes.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside