After doing a playfield swap on my Grand Lizard, everything's working well except the magnets. Here's my symptoms, I am about to dive into it more now.

- Switches register and lights/sounds activate...but neither magnet works
-Perhaps I re-attached the magnet wires to the terminal strips backwards?
-The MPU has been repinned
-Connector plug for 1J12 also repinned
- In solenoid test, I get a soft "click" for both magnets
- All fuses good
- Bridge rectifier near the magnet is connected properly, but perhaps I need to reseat it or solder the plugs on.

Any body have a similar issue? Thanks in advance.