Working on a Grand Lizard after doing a Hardtop on it. Everything on playfield is working. Except the locked on left flashers solenoid #7. There’s two that are part of this: the left under flipper frame and left side under plastic above the slings.
I tested Q30 and it tests good. I know they can do that and still be bad. I have a new transistor and predriver I can replace with but want to make sure there’s no other thoughts or ideas. I’ve cut one leg off of the three warming resistors but have some incandescent in there for testing currently. Couple pics showing the resistor board and lamps. The 5 ohm resistor tests at 5.1. Green and brown wires go to flash lamp holder above playfield.
Resolved here:
https://pinside.com/pinball/forum/topic/grand-lizard-hardtop-playfield-rebuild#post-6076204
6E2E285D-805F-42CF-B57E-58CE396C9BC7 (resized).jpeg83ECBBA3-EA54-487B-996D-A711FB2A4A26 (resized).jpegB92C785C-2F70-4127-AF40-0EC81E576D2F (resized).jpegE36D801E-ED37-4D9B-9CC7-2B529775173D (resized).jpeg