Quoted from Silverballbrain:sparky672 Sorry I have taken so long to get back to you. Long couple of months of catch up. I noticed this occuring after letting the machine run for thirty minutes of play. The green was completely covered perfectly when I received it. [quoted image]
Now in the credit area and lower left (3rd player display)[quoted image]
[quoted image]
The display are hot to begin with. I am concern some of them may not being receiving electricity properly.
[quoted image]
I am unsure how to verify the heat sources but it seemed to feel the majority was coming from the displays. (Never owned or used an Infrared probe before)
Definetly nothing covering the openings in the bottom of cabinet. No boxes or drapes to do that.
-Thank you for the suggestions. Will aquire a manual soon.
Try some fresh double sided adhesive foam tape between the glass display and the circuit board. This is a fairly common problem. From the pictures it looks like at least two of the displays are no longer sitting flat against the circuit boards. The display may lean down and rub against the tinted display windows if the old double sided adhesive tape has dried out.
