Rochester, NY
The screws that hold the flipper shaft to the crank are set screws. You'd need to tighten them down onto the shaft while the flipper is installed, and the bat is in the proper resting position.
(Topic ID: 294315)
Linked Games
Super Mario Bros.
Gottlieb, 1992
Topic Gallery
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Quoted from Sean:Thanks! Just by the looks of the mechanics, that is the problem, but how do you tighten them while the flipper shaft is in place. There is no wiggle room to get your hands in there to adjust the screw, unless there is another way?
The set screws should be easily accessible for a wrench in their normal positions. I think you have the crank on upside down. The flat plate part should be closer to the playfield
Quoted from Sean:And all 3 flippers at that. Well I took the lever assembly off and there is no way to flip it and install properly. The roller that would ride the plunger is on the wrong side. I appreciate the help with this and I will take a look to see if I can find the correct crank pawl. Looks like I need the LEFT to fix this one.
Some can just be swapped side to side, right?
PBR will have all the parts you need: http://www.pbresource.com/KT-GFLIP05.html
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
