guys..... help.... i just got a silver slugger and its was kind of a nightmare. i told him i needed to remove the head completely to fit it in my car. and he didn't have the keys to the head so he proceeded to remove the entire wire harness from the cabinet. i mean he disconnected every single wire and molex connection, coin door, flippers, volume nob, knocker, everything. he thought he could remove head that way. after he found out that wasn't gona work he left it like that. drove home and got his drill, duh, and opens the head. then disconnected every cable from the head and doped it in the box. now, i have just a completely loose wire harness i don't have a clue how to put this back and in what order. good news is this machine is in amazing shape, super clean. still has all the label on the molex connectors. but after looking at it i don't think they just match up. i don't see any matching connectors with the same code, but some with very similar codes. i'm gona need alot of help to put this back together. anything would help, including pics and what not. thanks guys.

he unhooked everything that wasn't soldered down. he didn't cut anything luckily.

dude i could use any photos of any connection on the game. i don't even know where to start. flippers, coindoor, tilt bob, EVERYTHING. any help would be great.

anyone have the wire schematics?

That's a super fun game. And a solid price. I'd do it

I've made some headway with the wiring of my silver slugger, but I could use some help. I could really use some close up photos of the connectors on the slam tilt(coin door), flippers(both), start button, initials buttons, both tilts on left side, speaker, and power supply. I need to verify some things before I go forward. Thank you fellow Gottlieb Guy's!

Yea, I'd like to find someone who can change game rules on my Gottlieb. I'd like to remove some scoring exploits.

so update with my silver slugger. i got it all put back together but i seem to be missing a cable..... its the A3J7 cable, 8 pin molex, looks to be an all white cable. from photos i've found on IPDB i believe it runs to the little board by the power supply (arrow 1) and looks to run separate from the other other wire harness's (Arrow 2). can someone check to see if i'm right? and if i'm right how in the hell do i replace that?

image-17 (resized).jpg

image-20 (resized).jpg

Yes in the settings

I finally got my silver slugger up and running. But the left flipper when raised is a little lower then the right. Its also got a little flop to it. How do I adjust this, and how do I know what's the proper angle to have them both set to?

Yes, the only difference is color.