Hi All
Having an issue with my Wipe Out. Just finished cleaning the playfield and leding the game. Replaced the resistor board under the back underside of the playfield with a new one. Just looked as though this has gotten pretty warm and did not want to have a failure going forward
I turn the game on and the attract mode seems just fine. Go to add credits by tripping the coin chute wires and no credits are added. Put the game into test mode and the flippers do not seem to work although before the clean/leding it was ok. Had viper tell me to remove P4 from the large transistor board and see if that would make the switches come back to life as he felt I could have a defective led that is affecting the switch matrix. This did not seem to affect the operation if the coin chute switches or the flippers in test mode
Any help would be very much appreciated from the Gottlieb System 3 guru's
Many thanks guys
George