Recently purchased a non working Joker Poker game.
Added 1 amp fuse to transformer and ground to power board. Tested voltages on power board and all are OK.
Plugged in CPU and connected first display. when I powered game on the display immediately came on with flashing 000 000 (there was no 5 second delay) which could indicate CPU issue.
I read that both rolling tilt and slam switch need to be closed and functioning for game to boot. I checked both switches and they are closed. How do you check if the switches are correctly functioning.
Prefer to not have to replace the boards on the game unless absolutely necessary.
Many thanks in advance for the feedback.