Incredible Hulk, The
Gottlieb, 1979Hi Friends,
I am reviving a Gottlieb Incredible Hulk. I'm needing to confirm the correct part numbers of the edge connector crimp contacts.
Molex 08-50-0108 20-22AWG is that correct?
I haven't figured out the number for the 18 AWG terminals? Anyone ?
I plan to strip the connector housings of the old contacts, fully clean them / and re-stuff with new terminals.
Thanks in advance for your help!
08-50-0134 (22 awg) and 08-52-0072 (18 awg) are the part numbers Great Plains used to sell. These have a higher current rating, but are otherwise identical to the part number you listed. Either will work in the Gottlieb housings.
Quoted from dothedoo:08-50-0134 (22 awg) and 08-52-0072 (18 awg) are the part numbers
There is no need to buy two sizes. Molex 08-52-0072 is for wire gauges 18 through 24, which covers everything you'll need.
Molex 08-50-0134 is for wire gauges 22 through 26, which overlaps but is just a bit too small. It leaves out the 18 & 20 that you need, but includes 26 that is not needed at all.
For more shopping options, 08-52-0071 is the same as 08-52-0072, except it's sold in strips for a reel machine, but you can also snip them apart.
See Molex for reference:
https://www.molex.com/en-us/products/part-detail/08500134
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gottlieb-sys-1-edge-connector-questions and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Redding, CA