on the circuit board connected to the ks relay there is two sides , one side only controls the add bonus light , undo the two screws holding the spring take it off ,then the washer then the double sided pivots , use some circuit board cleaner give the board a good clean, then with some sand paper giver the two pivots a clean, that pivot arm give it a little bend to make sure it is making contact with board then put it back together the same way you take it off, and check it with a dmm to make sure its making contact , make sure when you put the spring arm back on that its not to tight on or the pivot arm wont move freely around

footy games are not played at west lakes anymore there all played at Adelaide oval now