I'm about to restore mine but the problem is that takes much works...already scan all the playfield but also need scan off the bottom left playfield and the pyramid entrance. I will probably paint other parts. 1st scan of the playfield was made with old varnish and is really sad so I sand all the 2nd layer (on top) and let the 1st at some places to avoid sanding paint.
Will made a scan soon to made retouching with computer and probably print some parts around the old mylar who are too sad.
1st picture: parts needed
2nd picture: wax on the left and dirty varnish on the right

20181005_172140 (resized).jpg20181006_123052 (resized).jpg

Here is a link of an old and poor quality Stargate playfield scan on pinside forum

https://pinside.com/pinball/forum/topic/gottleib-stargate-cabinet-art-does-anyone-else-need-it

Here is the scan link: http://www.vpforums.org/uploads/dsfiles/img-248-1346617410.png

The only one find on the web, that I will probably use for the bottom left ejector...

So I 've just paint white parts and scan all the playfield after but the size of the picture is really huge so I could not post it.

I'll made computer retouch and print left and right entrance on the top and probably under Quartz entrance. Also the bomb and sarcophagus ejector on the bottom left.

I've not began retouch so tell me what parts you need to know where to start.

20181127_175817 (resized).jpg

20181127_175914 (resized).jpg

So many Neo...are you talking about Captain Neo? I've seen he has got one in the past...will ask him
THX