(Topic ID: 257621)

Gottlieb: Spirit. No power to the coin door. Pascal board.


By kklank

8 months ago



Topic Stats

  • 7 posts
  • 5 Pinsiders participating
  • Latest reply 7 months ago by kklank
  • Topic is favorited by 1 Pinsider

You

Linked Games

You're currently viewing posts by Pinsider kklank.
Click here to go back to viewing the entire thread.

#1 8 months ago

Not getting any power to the coin door. Help!
Using a P80 Pascal board.
Cannot set the 3 digit code to Spirit by pressing the TEST button on inside of coin door.
Reconnected all the connectors. Getting power from the board.

Any suggestions???

#5 8 months ago

Anybody else have a suggestion?

2 weeks later
#7 7 months ago
Quoted from eyeamred2u:

Open the backbox and with the power off, unplug connectors A1-J5 and A1-J6. Turn the machine back on. If the machine comes to life (flashing lights, etc.) then you have a stuck slam tilt and/or switch shorting. Turn the machine off and check the slam-tilt on the coin door and the roll-ball tilt that these switches are clean and normally closed. Check the coin door switches for shorts. You will have to remove any coin mechanisms to clearly view the coin switches. Note that the coin lockout wires may tangle with the coin switches, shorting them out. Check to see that none of the coin switches are stuck closed. If none of these are a problem you'll have to look elsewhere for a shorted switch. Once you correct the short, reconnect A1-J5 and A1-J6 and turn the machine back on and the machine should come up and be ready for play.

Figured it out. Coin lockout wire got tangled and shorted it out. Thanks!

Promoted items from the Pinside Marketplace
$ 259.95
Lighting - Led
Pin Stadium Pinball LEDs
$ 399.95
Lighting - Led
Pin Stadium Pinball LEDs
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
From: $ 18.00
Apparel - Men
Pinside Shop
$ 52.00
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 999.00
Flipper Parts
Mircoplayfields
€ 8.40
$ 10.00
$ 7.50
$ 78.00
Cabinet - Sound/Speakers
ModFather Pinball Mods
$ 99.99
Lighting - Other
Lighted Pinball Mods
$ 10.00
Cabinet - Decals
Docquest Pinball Mods
From: € 0.39
Rubber/Silicone
Scandinavian Pinball

You're currently viewing posts by Pinsider kklank.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside