I have built up a solarride from parts from 3 solarridegames and got a janin in it today, its the all in one board
The game boots up as it should and I can play the game.
The issue:

A1-j2 was missing ( someone had cut it off) so I hade to wire it up. I took a pic of my other solarride and wire the wires like that one. It did ha a colordiffrence on one of the cabels but all the other was correct so I took that cable and put it where I belive it should be. The gottlieb service manual 2nd edition is just crap, the colors there is totally diffrent than on many of my other sys one games on a1-j2. Im pritty sure I have wired everything right if you look at the pic from my other solarride. A1-j3 is not recrimpd cause the connectors looks good.
The game looks like this now:
Now the game looks

20180815_231613 (resized).jpg

20180823_174551 (resized).jpg

20180823_174608 (resized).jpg

20180823_180029 (resized).jpg

20180823_180036 (resized).jpg

20180823_180050 (resized).jpg

20180823_180658 (resized).jpg

20180823_180707 (resized).jpg

20180823_182754 (resized).jpg

THANX
Looks like I have mixed up som colors. If you got the time and will pleas write down what colors from pin 1 to the last so I cant mess it up again but I do think I can figure it out. Will check on monday or this weekend

Cheers