Quoted from marcburn:The control bank reset doesn’t fire and release the latched SB coil.
Inspect and diagnose this circuit with Alligator clip jumper wires
https://pinside.com/pinball/forum/topic/gottlieb-big-shot-repair#post-6305153
http://www.planetimming.com/Pinball/troubleshooting/EM%20Troubleshooting.pdf
http://www.pinrepair.com/em/index3.htm#features
Example of a pinsider actually doing this https://pinside.com/pinball/forum/topic/red-baron-tech-question#post-5858156
Be careful because this circuit runs on 120 volts
The 1 amp fuse will be the easiest thing to check. Most likely the SB Armature switch will be the problem. It's on the other side of the SB relay from the other switches.
pasted_image (resized).png