Working on a gtb streetfighter 2
Left sling blows fuse on powerup
I have replaced the coil,the diode on the coil.
All the transistors test good on the driver board
All the other coils fire in test and on gameplay.
Suggestions?
Working on a gtb streetfighter 2
Left sling blows fuse on powerup
I have replaced the coil,the diode on the coil.
All the transistors test good on the driver board
All the other coils fire in test and on gameplay.
Suggestions?
With an ohmmeter test continuity between ground wire and +. You might have 0ohm, if you got a value upper between 0 and 1 there is a continuity somewhere. Check continuity between the ground wire and the + links to the slingshot...you have to unsold the coil before doing this.
Quoted from gameover1173:Working on a gtb streetfighter 2
Left sling blows fuse on powerup
I have replaced the coil,the diode on the coil.
All the transistors test good on the driver board
All the other coils fire in test and on gameplay.
Suggestions?
Sounds like a dead short of some type. I'd look into where the power comes from to that sling; solder joints, etc..
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gottlieb-sf2-blows-left-slingshot-fuse?hl=benhurr and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.