I'm having a problem with the drop targets resetting on a king pin. I do not have a schematic and I'm wondering if anyone out there knows the sequence or if there's a certain switch on the motor relay to activate the targets resetting. Thanks in advance for any advice.

Thanks for the advice so far. I would check the switch on a motor relay. I'm away from the machine but will check when I get back home.
When I put all the drops up and start a game it plays normally but then when all the drops are down it'll just keep adding points and the motor will continue to run.
Once in a while with the play field up it will reset by itself.

Another thing I should have said even if you finished a game with a few drops down and start a new game it doesn't reset the drop targets.

Thanks for all of you guys input and information.
Again, I will not be able to check until tomorrow. (Had to get some things ready for the storm)

Again thanks for all the information and help. I checked out the motor and the S relay but still did not work. Went back through and my amazement I found out one why I was off one of the coil lugs.
Just when I think I know a little something I completely forget the basics.
The only problem now is sometimes when it resets it does it so quick it doesn't reset completely but much better than what it was.

Thanks. Will try.