Dearborn, MI
Quoted from Nikrox2:Still no sounds (chime bars) - all wiring looks good, fuses, etc - so really could use some expertise help on that one??
Check to make sure that the plungers move freely in the coils. Oftentimes, the cushioning material on the bottom of the unit will turn all gooey and gum up the plungers so that they get stuck in the coils.
If this is the case, disassemble the unit and clean the plungers using isopropyl alcohol. Replace coils sleeves. Remove whatever might be left of this material on the unit itself and install these:
