Trying to help a friend with bringing a HH back to life. Game now boots and plays, ground modes complete as is the board work.

So i’d say we’re 98% of the way there. The issue that still remains is no GI on the main PF. BackBox is lit, as does the lower pf when the ball enters the cellar. I believe the issue has to do with a broken switch terminal on the end of the U relay switch stack. I have a manual but the only part number it references is for the relay. I’m thinking the switch is covered in some gottlieb parts manual for that era. I’m really not a Gottlieb guy (learned a ton through the process!) so i dont have spare parts or reference manuals.

The broken blade (shown in pic) is on the outside (farthest away from the relay) of the switch stack. Its a make/break switch. Anyone know where i can get the deets on this so i can call Steve and order one? Or a spare switch blade they can sell me to rebuild the switch with? The break is of course right at the bakelite wafers with nothing to solder to lol.

Appreciate any help

D31B72A9-69DA-47AF-8066-8EB698ECEF60 (resized).jpeg

Ok so i removed the relay to get access to the screws to dismantle the switch stack. This is the bad boy i’m trying to source. From the outside edge of the base of the switch to the tip of the blades is 5/8” for the shorter blades and 15/16” for the middle one. At the base they are 1/4” wide.

Anyone know what this switch is referenced as?

D0B49719-7559-48D6-87FE-34E1740C6560 (resized).jpeg

FE355102-EFF9-4CDC-9FFE-7F5A2F8575BA (resized).jpeg

We have light! Big shout out to too-many-pins for hunting down the relay switch for me.

Thanks again Skip!!

D1D04343-DE9E-4686-AD62-D12B958A386A (resized).jpeg

AA7DE6CF-6813-4F60-92D3-74062D51BDF1 (resized).jpeg

6E92A4B3-F30F-4BA5-BA4F-FCEE8A26FFE9 (resized).jpeg