Quoted from Benhurr:Those 3 Bridges rectifier are same, and their references are only the Volt coming in...10Vac 16Vac and 50Vac. You also better change C1 and C2. As you can see on the pictures, wires are only plug on them by a pod but I've seen a video from TNT Amusement that preconised to cut them all and sold wires directly on parts to avoid looses connections. I Don't do that at all but I will...
[quoted image][quoted image]
You may be confusing my video where you cut the white molex plugs on System 80B machines. There is nothing wrong with slide on terminals for bridge rectifiers...however, soldering a new one in instead of reusing the original 20 year old slide on terminal is fine. Chances are the bridge wont go bad in your lifetime again anyway! Todd