It almost looks like the contact on the longer blade of the EOS switch is pretty worn down (or even missing?).
Might want to consider replacing the entire EOS switch.
You're currently viewing posts by Pinsider Runbikeskilee.
Click here to go back to viewing the entire thread.
It almost looks like the contact on the longer blade of the EOS switch is pretty worn down (or even missing?).
Might want to consider replacing the entire EOS switch.
I would say it is doubtful that type of spring has gone "bad".
Either it doesn't have enough tension (due to the anchor point being mis-adjusted) to return the mechanism to rest position, or there is a mechanical hangup with the plunger/sleeve, bushing, or other, that is causing excess friction.
From the initial description, it sounded classically like the EOS switch was malfunctioning and failing to shunt current around the high resistance part of the winding. Are you confident you have a low resistance path through the terminals of the EOS switch?
You're currently viewing posts by Pinsider Runbikeskilee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gottlieb-duotron-weak-flipper?tu=Runbikeskilee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.