Hello all. I've added a Car Hop pin to my lineup that needs a bit of work. It was heavily routed in the past. Somewhere along the line, the upper right flipper was removed and a bumper post put in it's place. Yikes!
I've managed to locate a flipper assembly to replace the removed unit, and have found what I believe to be the wires that went to it in the harness. There are 3 of them, with 2 of them wire nutted together. The two normal flippers have quite a few more wires attached to them than what I've found for this flipper so I'm a bit confused.
Can someone give me some guidance on how to wire up this flipper? I have the manual but am not understanding what I'm seeing in it.
Thanks in advance.
Tom